User Manual Mobile Phone Infinix X680B FCC ID: 2AIZN‐X680B INFINIX MOBILITY LIMITED
Explosion diagram specification 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 CTP_LCM REC Deco FRONT CAM BCAM FF_8W card holder MAIN PCBA REAR COVER R vice CAM rubber_8W FINGER_CON_STEEL FP Con foams Bat con rubber R MAIN CAM Con foams FINGERPRINT R CAM lens SUB PCBA con rubber USB rubber screw M1.4*L3.5 coaxial cable MOT 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 1 LT sensor Lg film FRONT COVER BATTERY BCAM AF_13M SPK screw M1.4*L2.
Know your phone 1. Front camera 2. Volume + key 3. Volume ‐ key 4.
SIM/SD card installation 1. Power off mobile. 2. Refer to the following picture for SIM / SD card installation.
Charging the phone You can charge your device using a charger or by connecting it to the computer using a USB cable (comes with the phone). 1. Please remind the front and back of the plug. 2. Use only INFINIX charger and cables. Other chargers or cables may damage the device. This will invalidate your phone warranty.
Emergency call If any emergency arises, dial 112/911 (or other emergency call number) for emergency help. Due to the nature of cellular networking, the success of emergency call is not guaranteed. FCC Warning: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
correct the interference by one or more of the following measures: ‐Reorient or relocate the receiving antenna. ‐Increase the separation between the equipment and receiver. ‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help.
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types X680B (FCC ID: 2AIZN‐X680B) has also been tested against this SAR limit. The highest reported SAR values for head, body‐worn accessory, and product specific (Hotspot) are 1.31 W/kg, 0.85 W/kg, and 0.85 W/kg respectively. The Max simultaneous SAR is 1.57 W/kg. This device was tested for typical body‐worn operations with the back of the handset kept 10mm from the body.
