CleanMate CleanMate Intelligent Automatic QQ2 Basic Series Robotic Vacuum Cleaner QQ2 Basic Series Robotic Vacuum Cleaner Clean Mate 365 If you have question or issue on the product, do not return it to the store. Please contact technical support first with live chat at: http://cleanmate.metapo.com REV.
Table of Contents CleanMate Safety Precautions 3 Safety Instructions 3 Special Features 4 Cautions 5 Main Unit and Accessories 6 Main Unit Features 7 Control Panel 8 Remote Control Functions 9 Battery Installation and Removal 10 Recharging the Battery 12 Installing Accessories 13 General Operation Preparing for use Starting Operation Stopping Cleaning 15 15 15 16 Cleaning and Maintenance 16 Useful Tips 21 Specification 22 Troubleshooting 23 Warranty Policy 24 2 Safety Pr
QQ-1 Clean Mate 365 CleanMate Safety Instructions 10. When using rechargeable batteries, please use the correct voltage and current listed on the product. If you are not sure about the standard voltage, please ask your distributor or query the local electricity company. 11. Use the factory-provided CleanMate battery and charger. 12. When your hands are wet, do not touch the battery charger, plug or power cord. 13.
Main Unit and Accessories No.
QQ-1 Clean Mate 365 CleanMate Control Panel 1.Press the power button, the power blue LED will light up. 2.Press Timer button to set the length of operation time. The numerical panel will display the operation time. When power is first turned on, the default setting is 80 minutes. The timer settings are from 10 to 80 minutes in 10-minute increments. 3.Try to set the operation time by the size of the area to be cleaned in order to prevent overuse of the battery and shortening its lifespan. 4.
Remote Control Functions QQ-1 Clean Mate 365 CleanMate Press the "Mode" button once to make the unit clean in "Spiral" mode only. The Timer will display "1" for one minute and then will show the cleaning time. When the CleanMate comes in contact with any object while running in this mode, it will automatically stop its movement. Battery Installation and Removal QQ-1CleanMate Clean Mate 365 4.
Recharging the Battery CleanMate Clean Mate 365 NOTES: The battery needs around 2.5 hours recharge time with the fast charger included. If the low battery light on the control panel blinks red, the battery must be immediately charged. 1.First, make sure that the power switch on the unit is set to 'Off'. 2.Plug the charger into the battery recharge socket on the side of the unit, then plug the other end into a wall outlet (See Illustration 1).
CleanMate Installing Accessories Fragrance Installation and Removal This robotic vacuum cleaner has a compartment built into it for adding fragrance to the air as the unit cleans. Any solid scent packet, insert, or dryer sheet can be used. DO NOT use any type of Liquid or Oil Fragrance with this unit. 1.Press the "Dust Bin Release Button" to release the dust bin cover. See the arrow in Illustration 1. 2.Remove the dust bin cover as shown in Illustration 2. 3.
General Operation CleanMate QQ-1 Stopping Operation • Press the Start/Stop button on the control panel of the unit or press the Stop button on the remote control. Caution! Please do not change the ultraviolet light tube yourself. Cleaning and Maintenance CleanMate The operation and maintenance of the CleanMate is very simple. To maintain top performance of the unit , it is recommended that you follow a routine cleaning and maintenance schedule after each use. 1.
Clean Mate 365 Cleaning Dust Bin and Air FilterQQ-1 CleanMate Illustration 3 Illustration 4 Illustration 5 Tab Illustration 6 Illustration 8 After operating the machine for a period of time, dust and dirt will accumulate on the vacuum entry on the bottom of the CleanMate. Cleaning this area regularly will help ensure that the unit performs properly. 1.Make sure the power of the CleanMate is turned off. 2.
CleanMate QQ-1 Mate 365 CleanClean Mate 365 Useful Tips Tip#1: Clear the area where the CleanMate is to clean of any items can be easily knocked over or caught in the Roller Brush or Side Brush. Useful Tips Tip#4 Fixing jams: Objects can get caught in the Roller Brush and prevent it from working properly. Immediately turn the unit off, clear the object causing the jam, and resume normal use. When something is jammed inside the CleanMate, It will emit a beeping sound.
22 This trouble shooting guides cover some CleanMate problems that you might have. If problem persists, please contact your local warranty provider or www.infinuvo.com for further assistance. The repairs that marked * needs to be done by qualified service personal.
Warranty Policy CleanMate Notes: CleanMate Please fill in your warranty card completely and submit it to your local customer service center. Infinuvo provides you, as the owner of this Infinuvo product, with the following Limited Warranty Policy. One year Product Warranty: Infinuvo warrants to the original purchaser of this Infinuvo product that the product is free from defects in original materials and workmanship for a period of up to one year from the date of initial purchase.