User's Manual

13
11th Guiyang Street, YEDA,
Yantai 264006, P.R. China
[phone]
 First, confirm that the machine is successfully connected with the laser rangefinding
module, and the battery level of the rangefinding module appears on the right side of the
Bluetooth icon in the status bar (refer to Chapter VIII Status Bar);
 Press and hold the controller (4) and the power button (5) on the main screen for 3s at
the same time to enable the laser rangefinding;
 After the laser rangefinding is enabled, the default mode is the continuous ranging mode,
as shown in 错误!未找到引用源。. Press the controller (4) and power button (5) at the
same time to switch to the single ranging mode, and press the two buttons again to switch
to the continuous ranging mode;
 After switching to the single ranging mode, press the power button (5) to perform the
single ranging operation. The current distance of the target measured by single ranging is
displayed in the upper right corner of the screen, as shown in 错误!未找到引用源。;
 After switching to the continuous ranging mode, the distance value of the current target is
displayed in real time in the upper right corner of the screen.
 If you want to change the measurement unit, please go to Settings > Units of Measure for
modification (refer to Chapter XIII. Main Menu);
 During continuous ranging, other functions such as photo taking and video recording are
not affected;
 Press and hold the controller (4) and the power button (5) at the same time to disable the
laser rangefinding;
XII. Shortcut Menu
The shortcut menu can be used for quickly changing the basic settings of some common
functions, including reticle style, reticle color, image sharpness, and zeroing distance. Press and
hold the controller (4) or press the power button (5) to save the changes and return to the home
screen.
 On the home screen, press the controller (4) to open the shortcut menu;
 Turn the controller (4) to switch between the following options, and the icon background
of the selected option is highlighted: