User's Manual

20
point of impact.
 After zeroing, press and hold the controller (4) to save the
zeroing result. At this time, the countdown message
"saving... 5” and the “saved successfully” prompt are
displayed.
Resetting
Zeroing
Distance
 If the zeroing distance is not consistent with the preset
target distance, this option can be used for setting the
zeroing distance;
 Select an invalid zeroing distance, press the controller (4)
to open its submenu;
 Turn the controller (4) to select Zeroing Distance;
 Press the controller (4) to activate the zeroing distance
reset function, and then two small triangle symbols are
displayed above and below the number ;
 Turn the controller (4) to set the value of the current
position, which can be switched between 0 and 9;
 Press the controller (4) to switch between the positions of
hundreds, tens, and ones digits;
 After setting, press and hold the controller (4) to save the
changes and exit. The cursor returns to the zeroing option,
and meanwhile the zeroing distance changes accordingly;
 In addition, the status bar is updated according to the new