User's Manual

21
11th Guiyang Street, YEDA,
Yantai 264006, P.R. China
[phone]
zeroing distance;
 After the zeroing distance is saved, enter the zeroing
function for zeroing (for details, refer to Zeroing
Settings > Zeroing Function in Chapter XIII. Main
Menu). After zeroing, press and hold the controller (4) to
save the zeroing results. In the saving process, the 5s
countdown message "data saving... 5” is displayed. After
successful saving, the “saved successfully” prompt is
displayed.
Standby
Setting Standby Status and Time
 Press and hold the controller (4) to open the main menu;
 Turn the controller (4) to select Standby;
 Press the controller (4) to open the submenu of Standby, including four
options: 2min, 4min, 6min, and off;
 Turn the controller (4) to select as needed;
 Press the controller (4) to confirm the selection, and then the selected
option is displayed in the top status bar;
 If Off is selected, the standby function is disabled.
Note:
- The standby mode is activated automatically when the device is tilted up or
down at an angle of more than 70° and left or right at an angle of more than
30°;
- When the device is in the shooting status (horizontally positioned), the