User's Manual

24
button (5) to add and correct it. When Add is displayed in the PIP window,
it indicates that the pixel defect has been added, and the number of
corrected defective pixels is increased by one. This process can be repeated
for correcting other pixel defects;
 At the position of the same defective pixel, press the power button (5)
again to cancel the correction at this position. If the word "Del" blinks in the
PIP, it indicates that the defective pixel is deleted successfully and the
number of corrected defective pixels is reduced by one;
 Each time you add or delete a pixel defect, the number of pixel defects
changes accordingly;
 When the cursor moves near the PIP window, PIP and the content on the
right move to the upper left corner automatically;
 After finishing the correction, press and hold the controller (4), and a
prompt is displayed asking if you want to save the settings. Turn the
controller (4) to select Yes or No as needed;
 Press the controller (4) to confirm the selection;
 When Yes is selected, the countdown message Saving...5 is displayed.
When Saving successful is displayed, the settings are saved. You can then
return to the home screen.