User's Manual

32
 After moving the reticle, a little white dot
appears on the screen, indicating the position
of the reticle before moving;
 After moving the reticle position to the actual
point of impact, press and hold the controller
(4) to save the current reticle position and
return to the home screen;
 Repeat aiming and shooting, until the position of the point of impact is consistent with that
of the aiming point.
Note: After the zeroing position at a distance is set up, you can switch the options of Zeroing
Distance in the shortcut menu.
XVI. Status Auto Hiding
TUBE TL35 SE supports automatically hiding the GUI and saving the reticle only so that there
is no blocking on the image. Specific operations are as follows:
 Turn the controller (4) to select Settings on the main menu;
 Press the controller (4) to open the secondary menu of Settings, and turn the controller (4)
to select Status Auto Hiding;
 Press the controller (4) to open the submenu of Status Auto Hiding and then select Hide
or Show;
 After the Status Auto Hiding is enabled, all GUI icons including the status bar are
automatically hidden and only the image and reticle are displayed if there is no operation
within 8s;
 Press or press and hold any button to invoke the GUI icons;
 You can use the buttons and the menu only after the GUI icons are displayed.