User's Manual
Table Of Contents
- Specifications
- I. Package Contents
- II. Introduction
- III. Features
- IV. Components and Controls
- V. Button Operation
- VI. Charging the Built-in Battery
- VII. Mounting and Usage
- VIII. Status Bar
- IX. Digital Zoom
- X. Photo Taking/Video Recording
- XI. Laser Rangefinding
- XII. Shortcut Menu
- XIII. Main Menu
- XIV. Calibration
- XV. Zeroing
- XVI. Status Auto Hiding
- XVII. Wi-Fi
- XVIII. Product Update and Description of App
- XIX. Technical Inspection
- XX. Maintenance
- XXI. Troubleshooting
5
11th Guiyang Street, YEDA,
Yantai 264006, P.R. China
+86-400-998-3088
press twice to take
a photo
enable/disable
video recording;
Press and hold for
more than 3s until
the main menu
pops up to open the
main menu
Rotate
counterclockwise
to adjust image
brightness
Shortcut menu interface
Adjust specific
parameters of a
function
Save and back to
the home screen
Switch between
menu
options/move
reticle position:
Clockwise: move
to the right/down
direction;
Counterclockwise:
move to the left/up
direction
Advanced menu
interface
Switch between
options or go to
the submenu
Pixel defect
correction/Zeroing/Laser
calibration interface
Change the
moving direction
VI. Charging the Built-in Battery
TUBE TL35 SE uses a built-in rechargeable
18650 battery pack, with battery power for up to 9.5
hours of normal operating time. The battery should be
fully charged before the first use. For how to charge
the battery, see Figure n.
Open the USB rubber cover (9) to reveal the
TypeC port (10).
Plug the TypeC end of the supplied USB cable (12)
into the Type C port (10) of the TUBE TL35 SE;
Connect the other end of the USB cable to the
power adapter (13), and insert the power adapter
(13) into a 100-240V power socket (14) for
charging;