责任 进取 敏行 合作 www.infiray.com 400-998-3088 Mini Series Mini Thermal Imaging Monocular User Manual InfiRay Technologies Co., Ltd. All rights reserved and shall not be copied and distributed in any form without written permission.
责任 进取 敏行 合作 www.infiray.com 400-998-3088 CONTENTS 1. Overview .......................................................................................................................................... 3 2. Features ............................................................................................................................................ 4 3. System Functions ............................................................................................................................. 5 4.
责任 进取 敏行 合作 www.infiray.com 400-998-3088 1.Overview The Mini series is a multifunction thermal imager with built-in VOx uncooled infrared focal plane array detector. Mini series has small size, light weight, high performance, various purpose and many other strengths. Moreover, a variety of sensors are equipped and it not only can be used as Monocular hand-held thermal imager or portable infrared thermal image sight but also can be used as wearable device when installed on the helmet.
责任 进取 敏行 合作 www.infiray.com 400-998-3088 2.Features Table 1. The features of the Mini series multifunction thermal imager Model ML19 MH25, ML25, PM3, PM6 Resolution 384×288 640×512 Pixel Size 17μm 12μm Response Spectra 8~14μm 8~14μm NETD ≤40mK@25℃，f#1.0 ≤40mK@25℃，f#1.2 MRTD ≤500mK@25℃，f#1.0 ≤600mK@25℃，f#1.2 Frame Rate 50Hz 50Hz Objective Lens 19mm 25mm Focus Mode Manual Manual Field of View 19°×15° 17.5°×14° Digital Zoom 1.0~4.0× 1.0~8.
责任 进取 敏行 合作 www.infiray.com 400-998-3088 hot/Pseudo Color hot/Pseudo Color Bluetooth Bluetooth CR123/16340（Recommend） CR123/16340（Recommend） /16650 /16650 CR123——2.5 hours CR123——2 hours 16340——up to 4 hours 16340——up to 3 hours 16650——up to 6 hours 16650——up to 4.
责任 进取 敏行 合作 www.infiray.com 400-998-3088 ● Automatic standby; ● Supply power and transmitting data through Type-C interface； ● Output analog video in PAL format; ● The installation interface can be expanded(Picatinny rail，helmet). 4.Product Components The main components of the Mini series are shown in figure 4-1. Figure 4-1. The main components of Mini series 5.
责任 进取 敏行 合作 www.infiray.com 400-998-3088 The status indicator icon is displayed in the upper left corner of the image and the battery power icon is displayed in the upper right corner. As shown in figure 5-1 of normal display. ▶ Switching off the encoder by putting the lens straight down and pressing the encoder for 3 seconds. 5.2 Electronic Magnification ▶ When there is no menu, rotating the encoder can zoom image.
责任 进取 敏行 合作 www.infiray.com 400-998-3088 5.3 Context Menu When there is no menu, short press the encoder to call up the context menu, as shown in figure 5-2. The four functions clockwise are image correction, image mode, brightness and laser. Rotating encoder can achieve switch function and short press encode can start up the executive function. If there is no operation within 5 seconds, it will exit the context menu automatically. Or it will exit after pressing the encoder for 3 seconds.
责任 进取 敏行 合作 www.infiray.com 400-998-3088 Figure 5-3. Advanced menu Operation： ▶ After entering the advanced menu, short press the rotary encoder to switch among functions. ▶ After a certain function item is selected, rotating the encoder to switch among the option items and a short press locks the certain option or adjusts the parameters. ▶ After locking an option item, rotating the encoder to adjust the parameters and short press performs the option and unlocks the option item.
责任 进取 敏行 合作 www.infiray.com 400-998-3088 horizon angle of the product icon turns blue, relative to the ground. and the dip angle scale appears at the left. Helmet Mode ON/OFF Video Out ON/OFF —— —— Video outputs through the The upper left attached type-c data cable. icon turns blue. Align the ranging line to the top (or bottom) of the target The special and press to record position 1.
责任 进取 敏行 合作 www.infiray.com Laser Laser calibration 400-998-3088 After entering the calibration Laser calibration interface, short pressing interface is shown encoder to switch X/Y in figure 5-5. orientation. Rotating the Reticle center encoder to move calibration Reticle center calibration reticle and then long pressing Reticle calibration interface is shown the encoder to exits the in figure 5-6. calibration interface.
责任 进取 敏行 合作 www.infiray.com 400-998-3088 Image contrast Contrast adjustment between Real-time display 1and 9 level. Image brightness Brightness adjustment between Real-time display 1and 5 level. When the cursor selects this Automatic correction NUC Mode option, short pressing the Displaying in the encoder to switch between A upper left corner. (A) and manual correction (M) and M. Figure 5-4. Rangefinder interface Figure 5-6. Reticle calibration interface Figure 5-5.
责任 进取 敏行 合作 www.infiray.com 400-998-3088 connected with the special bluetooth remote controller or smartphone APP. The bluetooth connection method is as follows: Turn on the bluetooth function on the Mini series, and the bluetooth icon will be flashing; Then turn on the bluetooth of the remote controller (or smartphone) within 1 minute, to complete the automatic connection between remote controller (or APP) and Mini series.
责任 进取 敏行 合作 www.infiray.com 400-998-3088 7.General Trouble Shooting Please contact with our company or sellers as soon as possible if there are some abnormalities that cannot be ruled out. Private demolition is strictly prohibited. Table 2. Mini series general trouble shooting Trouble description Probable reason Trouble shooting Adjusting the focal length of The focal length of objective lens objective lens until the image does not match. Image blurring becomes clear. Long time no image correction.
责任 进取 敏行 合作 www.infiray.com 400-998-3088 FCC Caution. §15.19 Labeling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. §15.21 Information to user.
