Tyke-L3 Thermal Imager Operation and Maintenance Manual V1.0.2 IRay Technology Co.,Ltd.
Release Note This manual introduces the use and precautions of Tyke-L3 thermal imager ("imager" for short). For operator’s safety, as well as reasonable and effective maintenance and use of the imager, you must read this manual carefully and strictly abide by the requirements specified therein before using the Imager. Before the release of a new manual, you must follow this manual for the use and maintenance of the imager and take other documents only for reference.
Table of Contents 1 Overview 2 Features and Technical Specifications 2.1 Main Features 2.2 Technical Specifications 3 Package and Label 3.1 Package 3.2 Label 4 Functional Components and Interface 4.1 Focus Knob 4.2 Power Button 4.3 Encoder Aviation Connector Interface 4.4 Encoder 4.5 Diopter Regulation Knob 5 Installation & Connection 1 1 1 1 3 3 3 3 3 3 4 4 4 4 5.1 Battery Installation 4 5.3 Cable Connection 4 6.1 Power-On 5 6.3 Operation Interface 5 5.
Table of Contents 6.3.4 Image Transmission 6.3.5 Infrared Image 6.3.6 Zero Calibration 6.3.7 Reset Preset Menu 6.3.8 Reticle Setup 6.3.9 Other Settings 7 Common Faults and Troubleshooting 8 Transportation and Storage 8.1 Transportation 8.2 Storage 8.2.1 Requirements on Storage Environment 8.2.
1 Overview Tyke-L thermal imager ("Imager") is mainly used to quickly observe and indicate living targets within 600m for day and night use. The observation unit is composed of infrared system, image transmission system, etc. It is easy to operate and learn with HD OLED screen. 2 Features and Technical Specifications 2.1 Main Features a.Brightness adjustment for screen display. c.Probability ranging. e.Manual and auto zeroing. g. Reticle selection and adjustment. b.
No.
3 Package and Label 3.1 Package The imager is packed in a special white packaging box, with black matte blister box as inner lining and foam at bottom, which is not easy to be damaged during transportation. For details, please take package list for reference. 3.2 Label The label is attached to wire cover of the housing, indicating model, SN, and company information.
4.3 Encoder Aviation Connector Interface The aviation connector interface is mainly used to connect external cables for outputting PAL videos, RS232 serial port debugging, etc. 4.4 Encoder digital zoom, and image adjustment. 4.5 Diopter Regulation Knob The diopter regulation knob is used to adjust the clarity of the display screen, which can be adapted to the observation of myopia and hyperopia glasses.
6 Operation Instructions 6.1Power-On the display screen as described below. power normally, long press the power press for 3s to display the shutdown menu, After the battery is installed and can supply button for 5 seconds to get the thermal imager started. When the system is started, it will display the image and booting up information (product model), as shown in Figure 5. Long press the power button for 5s to start the system.
on the right (range: ±90°). Respectively, operation is completed, tap the encoder are the digital zoom ratio (on the main adjusted state.
6.3.4 Image Transmission When connected, find the special app, Image transmission is to transmit the real-time images in the thermal imager. videos on a thermal imager to other devices, through a wired or wireless approach, for simultaneous observation, coordinated command, and quick directions.
6.3.5 Infrared Image Select the infrared image on the main menu and press the button to go to the infrared image submenu shown in Figure 9.
6.3.6 Zero Calibration Descriptions of Zero Calibration Position correction: You can move the reticle leftward or rightward on the screen by adjusting the position correction parameters. Turn the encoder clockwise to increase the values and move the Figure 10 Zero Calibration reticle rightward, or anticlockwise to decrease the values and move the reticle leftward. Height correction: You can move the reticle upward or downward on the screen by adjusting the height correction parameters.
6.3.8 Reticle Setup On the main menu, select Reticle setup. The submenu of Reticle setup is displayed, as shown in Figure 12. The reticle setup includes five parts: Reticle type, Reticle brightness, Reticle color, Save and exit, and Exit. You can adjust the reticle by selecting the right reticle type and setting its color and brightness as required. Reticle setup helps you point to a target position quickly in various application environments. Reticle type: includes cross reticle and spot reticle.
English options. You can select based on your language preference. (There will be cues for the separate language version, please contact the supplier for more language versions) Angle display: enables you to enable or disable the display of azimuth, pitch angle, and roll angle. When angle display is enabled, the azimuth is displayed on the upper part of the screen, the pitch angle on the right part, and the roll angle on the lower part.
No. Fault 6 Power-on failure 7 No digital video Cause Power board fault The video cable is not a twisted pair cable. Failure of video switch chip Troubleshooting Method Confirm or replace the power board Check the video cable. Check and replace the power board. Before using the thermal imager, users should read the Operation and Maintenance Manual carefully, and solve related faults following the instructions of Table 2.
it in a place directly exposed to sunlight and protection in accordance with the Prohibit storing items that have a features will not be impaired. for a long time. corrosive effect on the imager. 8.2.2Inspection during Storage Take necessary anti-static and anti-shock measures for the product during storage. Control such activities as storage, packaging, requirements to ensure that the product a) Before storage, check the completeness of the product.
FCC Warning: § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.
