InfiRay Outdoor ⚫ Zoom Series ⚫ Operating Manual Add: 11th Guiyang Street, YEDA, Yantai, P.R. China Tel: 0086-400-998-3088 www.infirayoutdpoor.com IRay Technology Co., Ltd. Operating Manual Zoom Series Email: infirayoutdoor@infiray.com Web: www.infirayoutdoor.com ZH25/ZH38/ZH50 V1.
IMPORTANT SAFETY INFORMATION Environmental influences WARNING! Never point the lens of the device directly at intense heat sources such as the sun or laser equipment. The objective lens and eyepiece can function as a burning glass and damage the interior components. The warranty does not cover damage caused by improper operation. Risk of swallowing Caution: Do not place this device in the hands of small children. Incorrect handling can cause small parts to come loose which may be swallowed.
User information on the disposal of electrical and electronic devices Intended use (private households) The device is intended for displaying heat signatures during nature The WEEE symbol on products and/or accompanying observation, remote hunting observations and for civil use. This device is documents indicate that used electrical and electronic not a toy for children. products must not be mixed with ordinary household Use the device only as described in this instruction manual. The waste.
1 Specification Model ZH25 ZH38 ZH50 Type FHD OLED Resolution 1440×1080 Dimension 0.4" Battery Detector Specifications Battery Uncooled Vox Type Li-ion Battery Pack / 4400mAh / DC 3.7V Resolution 640×512 Service Voltage, V 3 ~ 4.2 Pixel, μm 12 External Voltage, V 5 (Type C USB) NETD, mK Physical Specifications ≤ 25 Frame Rate, Hz Max. Operation (t=22℃), h★ 50 Optical Specifications 13/25 19/38 25/50 F-number 1/1.2 0.9/1.2 0.92/1.2 Field of view, degree 32.9 × 25 / 17.
2 Package Contents 3 Description ⚫ ZOOM Series Thermal Imaging Monocular The ZOOM series thermal imaging monocular is a thermal imaging ⚫ Portable bag handheld product integrating thermal observation, hotspot tracking, ⚫ IBP-1 Battery Pack × 2 photographing and video recording, Wi-Fi connection, etc. The dual-FOV ⚫ IBC-1 battery charger for Battery Pack lens enables fast manual FOV switchover.
4 Features 5 Components and Buttons ⚫ Dual-FOV lens ⚫ 12μm self-developed detector ⚫ High image quality ⚫ FHD OLED (1440×1080) ⚫ Rechargeable Battery Pack for quick replacement ⚫ 50Hz high frame rate ⚫ Eyepiece supporting 20× zoom ⚫ Digital zoom: 1×/2×/3×/4× ⚫ Built-in 32G memory space, supporting photographing and video recording ⚫ Built-in Wi-Fi module, supporting InfiRay outdoor App ⚫ Built-in digital compass and motion sensor ⚫ Ultraclear mode ⚫ Supporting PIP, defective pixel correction, and other fu
6 Button Operations Button Power button Up button Current Status Short Press Press and Hold Powered off —— Power on the device Home screen Standby the device Power off the device Standby mode Wake up the device —— Main menu interface Return to the upper menu without saving changes —— Defective pixel correction interface Add/delete defective pixels —— Home screen Digital zoom Turn on/off the PIP function Menu interface Navigation upwards —— Home screen Open the shortcut menu Go t
7 Battery Pack ➢ After fully charged, remove the Battery Pack from the battery charger (13). The ZOOM series uses the rechargeable lithium-ion Battery Pack IBP-1, which has a battery life of 10 hours. Please charge the Battery Pack before first use. Method 1: Charging with Battery Charger ➢ Align the pins (A) of the Battery Pack (9) with the groove (B) of the battery charger (13), and insert the Battery Pack (9) into the battery charger (13).
(3) on the Zoom series will change also to display the battery status. - - ➢ Upon installation, flip down the ring-pull (12). When the bulge on the If the status light is steady orange, the Battery Pack is being ring-pull (12) points to ‘CLOSE’ on the Battery Pack (9), the Battery charged. Pack (9) is installed. If the status light turns green, the Battery Pack is fully charged. ➢ The Zoom series can only be powered by this Battery Pack (9).
warm up. 8 External Power Supply ➢ Do not charge the battery unsupervised. ➢ Do not use the charger if it is modified or damaged. The Zoom series can be powered with an external power supply, such as ➢ Charge the battery in the environment of 0°C to +45°C. Otherwise, the a Power Bank (5V). service life of the battery will be reduced. ➢ Charging time should not exceed 24 hours. ➢ Do not expose the Battery Pack to high temperature or a naked flame. ➢ Do not immerse the Battery Pack in water.
same user. text prompt reading “Cover lens during calibration” will appear on the ➢ Rotate the focusing ring (2) of the objective lens to focus on the object screen. The background calibration will start after 2s. to be observed. ➢ To set the image mode, display brightness, image sharpness, image contrast, and so on, refer to the Shortcut Menu section in this manual. ➢ After use, press and hold the Power button shutdown (5) and countdown a is displayed. Release the button after the countdown.
Photographing and Video Recording ➢ The recording icon and recording time prompt are displayed on the upper left corner of the display, and the time is in the format of HH: The Zoom series thermal camera is equipped with a built-in 32GB memory MM: SS (hour: Minute: Second). storage and supports photographing and video recording.
VID_yyyyMMddHHmmss.mp4 in the built-in memory card 13 State Bar (yyyyMMddHHmmss-year, month, date, hour, minute, and second); - The maximum duration of a video recording file is 30 minutes. When the duration is more than 30 minutes, the video will be automatically - recorded onto a new file. The status bar is on the top of the display to indicate the current operation Due to the limitation of the storage space, it is recommended that you status of the thermal camera.
Icon Color/Status Battery Status Green more than 40% Yellow 20% - 40% Red Less than 20%, need to charge instantly Lightning icon External power supply meanwhile charging inside the Battery Pack USB icon External power supply without Battery Pack in the Zoom button (7) to change the image brightness from level 1 to level 5. - Image sharpness: Press the M button (7) to change the image sharpness from level 1 to level 5.
menu option or to open the submenu. ➢ During the continuous operation of the thermal camera, when you exit ➢ In the second and third-level submenu, press the Up (6) / Down (8) from the main menu, the cursor > remains at the position before exiting. button to choose a parameter or function; press the M button (7) to When you restart the thermal camera and go to the main menu for the confirm the selection.
● Press the Up (6) / Down (8) button to select the Wi-Fi option. ● Turn the Wi-Fi on /off with a short press of M (7) button ● When the function is turned on/off, the icon in the status bar changes accordingly. Turn video output on/off Video Output ● Press and hold down the M (7) button to enter the main menu. ● Press the Up (6) / Down (8) button to select the Video Output option. ● Briefly press the M (7) button to turn video out on/off.
Turn the motion sensor on/off Motion Sensor ● Press and hold the M (7) button to enter the main menu. ● Press the Up (6) / Down (8) button to select the Motion Sensor option. ● Press the M (7) button to turn the gravity sensor on/off. ● After the motion sensor is enabled, its functions will be displayed on both sides of the screen. ● The curved ruler on the left represents the tilt angle and the vertical ruler on the right represents the pitch angle.
● The right side of the PIP window shows the cursor moving direction (X-axis, Y-axis), and number of defective pixel correction. ● Press the M (7) button to change the moving direction, and press the Up (6) / Down (8) button to move the cursor. ● You can repeat the preceding steps to change the cursor location until it reaches the position of the defective pixel. ● Press the Power (5) button to add a defective pixel. In the PIP window, the word "Add" is displayed, and the defective pixel is added.
● Rotate the thermal camera along the three axes indicated by the icon, with each axis rotating at least 360°. ● After 15s, the calibration is finished and exit to the main menu automatically. Setting the general settings ● Press and hold down the M (7) button to enter the main menu. ● Press the Up (6) / Down (8) button to select the General Settings option. ● Briefly press the M (7) button to enter the submenu. ● This menu item allows you to configure the following settings.
● Briefly press the M (7) button to active the Date submenu. Two triangle icons will appear above and below the value. ● Select the correct value for the hour and minute with a short press of the Up (6) / Down (8) button. ● Switch between hour and minute with a short press of the M (7) button. ● Press and hold down the M (7) button to save and exit. And the time in the status bar changes accordingly.
⚫ Open the ZOOM_Storage folder and create a new folder names "update" in the computer. ⚫ Copy the downloaded firmware program (.zip) to the update folder in the ZOOM_Storage. ⚫ Then, in the General Settings submenu, select the Firmware Update menu option with the Up (6) / Down (8) button. ⚫ Open the Firmware Update submenu with a short press of the M (7) button. ● Short press the Up (6) / Down (8) to select Yes or No. Select Yes to confirm update and select No to cancel update.
- Image mode: White hot - Ultra-clear mode: Off - Digital zoom: 1× magnification - Compass: Off - Wi-Fi: Off - Motion sensor: Off Showing the system information ● In the General Settings submenu, select the Info menu option with the Up (6) / Down (8) button. ● The relevant information of device will be shown by a short press of the M (7) button.
➢ When you press the Up button (6) to enlarge the main image, the image in the PIP window will also be enlarged by 2 times accordingly. For example, if the main image is enlarged by 1×, 2×, 3×, or 4×, the ➢ The icon on the left shows the approximate distance of the corresponding target. ➢ Long press the M (7) button to exit to the stadiametric ranging function. image in the PIP window will be enlarged by 2×, 4×, 6×, or 8×respectively.
specific operations, refer to the operations of main menu functions). restored to the default factory settings. ➢ After the Wi-Fi is enabled, search for the Wi-Fi named ZOOM_XXXXXX on the external device, among which XXXXXX is the serial number of the device. ➢ Select the Wi-Fi, enter the password and connect. The initial password is 12345678. via the mobile app. and update the program by connecting a smartphone or laptop via Wi-Fi.
➢ If your device has been connected to a mobile device, please switch 22 Maintenance on the mobile data in mobile device. After connection, an update prompt will be displayed automatically in the APP. Click Now to The maintenance should be carried out at least twice a year and includes download the latest version immediately or click Later to update later. the following steps: ➢ InfiRay Outdoor can store the last connected device automatically.
Faults Possible Causes Solutions The thermal camera cannot start.
24 Legal and Regulatory Information including interference that may cause undesired operation. Information to the user Wireless transmitter module frequency range: Any Changes or modifications not expressly approved by the party WLAN: 2.412-2.472GHz (for EU) responsible for compliance could void the user's authority to operate the Wireless transmitter module power<20dBm (only for EU) equipment. IRay Technology Co., Ltd.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. Body-worn Operation This device was tested for typical body-support operations. To comply with RF exposure requirements, a minimum separation distance of 0.
