Operating Manual

12 Photographing and Video Recording
The Zoom series thermal camera is equipped with a built-in 32GB memory
storage and supports photographing and video recording. The image and
video files will be named after time, so it is recommended to set the system
date and time in the Main Menu before using the photo and video functions
(refers to Main Menu - Settings - Date/Time Setting in this manual), or to
synchronize the system date and time in the settings of the InfiRay Outdoor
App. For details, refer to the Operating Instructions for the App in our official
website (www.infirayoutdoor,com).
Photographing
➢ On the home screen, press the Down button (8) to take a photo. The
image freezes for 0.5 sec with a camera icon flash on the upper
left corner. After the image is taken, the icon disappears.
➢ The images taken are saved in the built-in memory storage.
Video Recording
➢ On the home screen, press and hold the Down button (8) to start the
video recording.
➢ The recording icon and recording time prompt are displayed on
the upper left corner of the display, and the time is in the format of HH:
MM: SS (hour: Minute: Second).
➢ The red dot on the left of the time
prompt will flash continuously
when recording.
➢ During recording, you can also
take a photo by pressing the
Down button (8).
➢ Press and hold the Down button (8) to stop and save the video.
Recording.
➢ All videos and photos will be saved in the built-in memory storge.
➢ Zoom series is built-in Microphone function, which will be automatically
enabled when starting a video recording, and the microphone icon is
displayed in the status bar on the top of the screen.
➢ When turning off the video recording function, the microphone function
is turned off and the icon in the status bar is disappeared automatically.
Note
- You can enter and work on the menu during video recording.
- The image taken and the recorded video will be respectively saved in
the names in the formats of IMG_yyyyMMddHHmmss.jpg and