Operating Manual

● The right side of the PIP window shows the cursor moving direction (X-axis, Y-axis),
and number of defective pixel correction.
● Press the M (7) button to change the moving direction, and press the Up (6) / Down
(8) button to move the cursor.
● You can repeat the preceding steps to change the cursor location until it reaches the
position of the defective pixel.
● Press the Power (5) button to add a defective pixel. In the PIP window, the word "Add"
is displayed, and the defective pixel is added.
● At the same position, you can revoke the defective pixel correction by pressing the
Power (5) button again. Del is displayed in PIP window.
● Each time you add or delete a defective pixel, the number of defective pixels changes
accordingly.
● When the cursor moves near PIP, PIP and the content on the right will move to the upper left corner automatically.
● After the correction, press and hold the M (7) button until a prompt is displayed to confirm whether to save the correction. You
can choose Yes to save the correction and exit or choose No to cancel the correction and exit.
Compass
Calibration
Calibrating the digital magnetic compass
● Press and hold down the M (7) button to enter the main menu.
● Press the Up (6) / Down (8) button to select the Compass Calibration option.
● Press the M (7) button to enter the compass calibration interface. The calibration
prompt will be displayed on the screen.