Operating Manual

● Rotate the thermal camera along the three axes indicated by the icon, with each axis rotating at least 360°.
● After 15s, the calibration is finished and exit to the main menu automatically.
General Settings
Setting the general settings
● Press and hold down the M (7) button to enter the main menu.
● Press the Up (6) / Down (8) button to select the General Settings option.
● Briefly press the M (7) button to enter the submenu.
● This menu item allows you to configure the following settings.
Date
Setting the system date
● In the General Settings submenu, select the Date menu option with the Up (6) / Down (8) button.
● The date is in the format of YY/MM/DD.
● Briefly press the M (7) button to active the Date submenu. Two
triangle icons will appear above and below the value.
● Switch among the year, month, and day with a short press of the
M (7) button.
● Set the correct year, month, and day with a short press of the Up
(6) / Down (8) button.
● Press and hold down the M (7) button to save and exit.
Time
Setting the system time
● In the General Settings submenu, select the Time menu option with the Up (6) / Down (8) button.
● The time format is displayed as HH:MM in 24-hours format.