Operating Manual

⚫ Open the ZOOM_Storage folder and create a new folder names "update" in the computer.
⚫ Copy the downloaded firmware program (.zip) to the update folder in the ZOOM_Storage.
⚫ Then, in the General Settings submenu, select the Firmware Update menu option with the Up (6) /
Down (8) button.
⚫ Open the Firmware Update submenu with a short press of the
M (7) button.
● Short press the Up (6) / Down (8) to select Yes or No. Select Yes
to confirm update and select No to cancel update.
● Confirm your selection with a short press of the M (5) button.
● If Yes is selected, the thermal camera will update and restart
automatically.
Factory Reset
Restoring factory default settings
⚫ In the General Settings submenu, select the Factory Reset menu option with the Up (6) / Down (8)
button.
⚫ Enter the Factory Reset submenu with a short press of the M (7) button.
⚫ Press the Up (6) / Down (8) button to select Yes or No. Yes means to restore factory settings and No
means canceling the operation.
⚫ Confirm your selection with a short press of the M (5) button.
⚫ If Yes is selected, the thermal camera will reboot automatically.
⚫ If No is selected, the operation is canceled and the screen returns to the upper menu.
After the Factory Reset is selected, the following functions will be restored to default settings: