Operating Manual

7 Battery Pack
The ZOOM series uses the rechargeable lithium-ion Battery Pack IBP-1,
which has a battery life of 10 hours. Please charge the Battery Pack before
first use.
Method 1: Charging with Battery Charger
➢ Align the pins (A) of the Battery Pack (9) with the groove (B) of the
battery charger (13), and insert the Battery Pack (9) into the battery
charger (13).
➢ Connect the Type-C plug of the data cable (14) to the port (C) of the
battery charger (13).
➢ Connect the other plug of the data cable (14) to the USB port of the
power adapter (15).
➢ Insert the power adapter (15) to a 100V - 240V power socket (16) to
charge the Battery Pack.
➢ Upon installation, the LED indicator (D) on the Battery Pack charger (13)
will start to glow or blink.
- If the indicator is steady red, the Battery Pack is being charged.
- If the indicator turns green, the Battery Pack is fully charged.
- If the indicator blinks red, the battery charging holder is connected
to the power source but there is no installed Battery Pack.
➢ After fully charged, remove the Battery Pack from the battery charger
(13).
Method 2: Charging with Type-C Port
➢ Open the Type-C port cover (17) on the bottom of the Zoom series.
➢ Connect the Type-C end of the data cable (14) to the Type-C port (17).
➢ Connect the other end of the data cable (14) to the power adapter (15).
➢ Plug the adapter into a 100-240v power socket (16) for charging.
➢ The battery icon will be changed to the charging icon on the
display.
➢ During charging the Battery Pack with the Type C port, the status light