User's Manual
Infly Official website Infly Official Vlog
55mm
385mm
80mm
Take out the
toothbrush host and
brush head, and install
the brush head on the
main machine.
Please note that the
direction of the
brush head buckle
should correspond
to the host during
installation.
Press the switch
button and the
toothbrush will start
up. Press the button
continuously to
change the brushing
mode.
When the machine
is off, long-press the
switch button for
about 5 seconds. All
the indicators blink
3 times to enter the
travel mode, and the
switch button is
locked.Press the
button again for
about 5 seconds and
all the indicators blink
3 times to unlock and
return to normal
mode.。
1. Wash the brush head and bristles after use and let
them dry naturally.
2. Please do not pull on the bristles, otherwise it will
be easily deformed and shedding.
3. Do not immerse the body of the toothbrush in water.
4. Do not use water or acidic cleaning solution higher
than 40℃ for cleaning.
5. Please clean the stains on the charging stand with a
soft cloth
6. Before cleaning the charging stand, be sure to
unplug the power plug from the socket to prevent
electric shock.
7. Wipe the plug with a dry cloth to avoid short circuit.
8. Recommended to replace the brush head every three
months.
9. When using for the first time, if you have any remaining
power, please use up and recharge
10. 6 months without use, please charge 3-5 hours
before use
11. During use, if the charging indicator flashes for a
few seconds and then stops, it means that the
power is insufficient.
12. Place the main unit of the toothbrush on the
charging stand and confirm that the charger is
connected to the power source.
13.The indicator light flashes during charging and
stays on for a long time. If it has not been charged
for a long time, it will be normal for the indicator
light will wait 6-10 minutes before recharging.
Thank you for choosing infly products! In order to
effectively protect consumers and use our
high-quality products with confidence, infly provides
a one-year free warranty service on the toothbrush
host, charging base, and unopened brush head
Within 12 months from the date of your purchase, any
failure of this product, after determined as a product
quality problem by infly after-sales service center, you
can enjoy free repair service.
If any product damage or defect is not attributable to
the product quality itself, it is not covered by the
warranty.free exchange service will not be accessed
under following circumstances:
1. Failure or damage due to natural disasters, earthquakes,
lightning strikes, abnormal voltage, environmental
factors.
2. Dismantle, modify or replace the non-original parts
by yourself or entrust a repair manufacturer not
authorized by the original manufacturer.
3. Those who have not operated according to the user
manual or caused damage due to improper use, such
as using the wrong current and voltage, inserting the
product into an unqualified outlet, or other man-made
damage.
4. If warranty is required, please fill in the content of
the warranty card completely. If the company is unable
to actually fulfill the obligation of free warranty
service due to inaccurate contact information, the
purchaser shall bear the responsibility.
5. For service and warranty content, please log in
infly's official website or call +86 400-026-8026
Travel Mode
Charging Maintenance
Thanking
Starting use
After-sale policy:
After starting, if the
battery indicator
flashes, it needs to
be charged.Please
wipe the toothbrush
host and base clean
before charging,
and keep it dry.The
base is connected to
the power supply,
and the main
toothbrush unit can
be charged by
plugging it into the
base.Indicator light
flashes during
charging and stays
on when fully
charged.
Assemble electric toothbrush
Knowing the toothbrush
Switch button
Toothbrush host
Toothbrush head
standard mode
soft mode
cleaning mode
cleaning+ mode
Power light
Charging base
USB
1、How to do if the machine cannot be turned on?
Check whether the battery is sufficient, if the battery is
insufficient, you need to charge it first; If it is fully
charged, but still cannot be turned on, it may be into
travel mode, please refer to the travel mode
instructions to unlock.
2、Why is the vibration reduced after a period of use?
With the increase of the use time, the amount of electricity
will decrease, which will lead to weak vibration, just
charge the toothbrush.
FAQ
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV
technician for help.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
FCC Statement
Manufacturer: Dongguan Infly Life Technology Co., Ltd.
Add.:Room 202, Block 1, No.36 Caixin Road, Daojiao
Town,Dongguan, Guangdong, China
infly Grace maglev sonic
electric toothbrush
manual
Packing Accessories
Host
Toothbrush head Manual
Charging base
Assembly
Schematic
Thank you for choosing infly electric toothbrush.
Please refer to this instruction before starting to use
check whether the packing accessories is complete
and follow the instructions to complete the production,
after the product is assembled, it will be used.
Model:T20030SIN
封面
MADE IN CHINA
infly清妍磁悬浮声波电动牙刷
使用说明书
FCC ID:2AW76-T20030SIN