Impact Drill Model DV 18V Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended that these INSTRUCTIONS be kept readily available as an important reference when using this power tool.
GENERAL OPERATIONAL PRECAUTIONS WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following. Read all these instructions before operating this product and save these instructions. For safe operations: 1. Keep work area clean. Cluttered areas and benches invite injuries. 2. Consider work area environment. Do not expose power tools to rain. Do not use power tools in damp or wet locations.
SPECIFICATIONS Voltage (by areas)* Power input Speed change Forward rotation No load speed Reverse rotation Steel Capacity Concrete Wood Full load impact rate Weight (without cord) (110V, 220V, 230V, 240V) 690 W* 1 0 – 1000 min-1 0 – 600 min-1 13 mm 18 mm 40 mm 8400 min-1 2 0 – 3000 min-1 0 – 1800 min-1 8 mm 13 mm 25 mm 27300 min-1 2.0 kg *Be sure to check the nameplate on product as it is subject to change by areas. STANDARD ACCESSORIES (1) Chuck Wrench (Spec. only for keyed chuck) ...........
NOTE When the sleeve does not become loose any further, fix the side handle to retaining ring, hold side handle firmly, then turn the sleeve to loosen by hand. (Fig. 4) Retaining ring To attach a depth gauge on the side handle, insert the gauge into the U-shaped groove on the side handle, adjust the position of the depth gauge in accordance with the desired depth of the hole, and firmly tighten the side handle grip. (Fig. 7) Depth gauge Loosen Sleeve Side handle Side handle Loosen Fig. 4 6.
9. High-speed/Low-speed changeover: Prior to changing speed, ensure that the switch is in the OFF position, and the drill has come to a complete stop. To change speed, rotate the gear shift dial as indicated by the arrow in Fig. 9. The numeral “1” engraved on the drill body denotes low speed, the numeral “2” denotes high speed. If it is hard to turn the gear shift dial, turn the chuck slightly in either direction and then turn the gear shift dial again. Gear shift dial MAINTENANCE AND INSPECTION Fig.
MODIFICATION: Hitachi Power Tools are constantly being improved and modified to incorporate the latest technological advancements. Accordingly, some parts may be changed without prior notice. NOTE Due to HITACHI’s continuing program of research and development, the specifications herein are subject to change without prior notice.
30 31 503 502 501 32 6 39 7 40 33 20 19 8 22 10 41 34 21 9 42 23 11 24 48 43 35 12 49 44 25 27 50 51 46 36 45 26 13 47 28 1 52 53 37 29 14 2 3 38 13 3 55 54 4 5 15 18 17 16 Item No. 1 2 31 32 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 1 32 2 32 3 33 34 35 1 35 2 35 3 36 37 38 39 Code No. No.
Hitachi Koki Co., Ltd. 404 Code No.