Regulatory model IN112/IN114/IN116 P/N PA139-4000-00 DISPERINDAG No. 0287/1.824.51/09.
Please read the safety instructions booklet before setting up the projector. Unpack the box 1 Here's what's included: Remote Projector Computer Cable Power Cable Documentation Pack Save the box and packing materials. Put batteries in the remote 2 The remote uses 2 AAA batteries. 1 2 3 Please dispose of batteries in an environmentally proper manner. Buy a Full-Featured Remote and Other Custom Accessories www.infocus.
Connect source Color-coded connections make it easy. You can connect more than one source if needed. Connect to: Computer (using VGA) Got an Apple computer? Computer Cable (included) You may need an adapter. For more information, see How-To Guides at www.infocus.
Turn on projector and source 1 Connect the power cord to the projector and to an electrical outlet The power light on the projector will light blue. 2 Turn on the projector Press power (on the projector or remote). The power light will light blue. 3 Wait for the lamp to warm up It will take a minute for the lamp to reach full brightness. 5-10 sec. Warning: Do not look directly into the lens while the projector is being used.
ector ss. 5 Adjust the picture 1 Height Need Help? 1 Press the Help button on the remote at any time to get help with connecting sources and improving the picture. 2 1 Lift the front of the projector to the desired height. 2 Rotate the foot under the front of the projector. Interactive Screen Size and Distance Calculator www.infocus.com/calculator 2 Keystone Buy a Screen and Other Custom Accessories www.infocus.
Using the menus 1 Press MENU, then press PRESET SOURCE or to review the menu options. To enter a submenu, highlight the desired submenu and 2POWER TEMP/LAMP press on the projector or Select on remote. 3 To adjust a menu setting, highlight the desired menu option and press or . 4 Press the MENU button to exit the menu system. Note: Most picture settings are disabled (gray) unless a source is being displayed.
TROUBLESHOOTING If there is no picture or the picture is blank If the power light is off, make sure the power cord is connected and plugged into a live electrical outlet, and then press the POWER button on the keypad or remote. Check video source and cables. Make sure the video source (computer, DVD player, VCR, etc.) is turned on and cables are securely connected between the source and the projector. Make sure your computer's video port is enabled.
Questions? We’re here to help! Visit us at: www.infocus.com/support We’re here to support you with your new purchase. We can help you with… • Determining screen sizes • Documentation in other languages • Connecting your sources (TV, DVD, Cable/Satellite, Game, etc.
