User`s manual

Maintenance

► Before maintaining the air lter, make sure the power cable is

unplugged, and allow the projector to cool sufciently.

►Only use specied air lters. Do not use the projector without the air lter or

the lter cover. This can result in a re or projector malfunction.

►Clean the air lter periodically. If the air lter becomes clogged by dust or the

like, internal temperatures rise and could cause a re, a burn or projector mal-

function.

WARNING

• Only reset the lter hours when you have cleaned or replaced the air

lter to ensure lter hour accuracy.

• The projector may display a message such as “CHECK THE AIR FLOW” or

turn off the projector, to prevent internal temperatures from rising.

NOTE

Cleaning and replacing the air lter (continued)

10.

Put the lter cover back into place.

11.

Turn the projector on and reset the lter hours using the RESET FILTER

HOURS item in the BASIC MENU.

(1) Press the MENU button to display the menu.

(2) Highlight RESET FILTER HOURS using the ▲/▼ cursor buttons, then

press the ► cursor (or the SELECT) button. A dialog will appear.

(3) Press the ► cursor button to select the “OK”. This resets the lter hours.