Operation Manual

26
Operating
STANDBY/ON SOURCE MENU
1.
To start the MENU, press the MENU button. The MENU you last used (BASIC
or ADVANCED) will appear. BASIC MENU will appear if the projector was just
powered on.
Using the menu features
2.
(1) Use the ▲/▼ cursor buttons to highlight which item
you would like to operate. If you want to go to the
ADVANCED MENU, select ADVANCED MENU.
(2) Use the ◄/► cursor buttons to operate the item.
This projector has the following menus: BASIC MENU, PICTURE, IMAGE, INPUT,
SETUP, AUDIO, SCREEN, OPTION, NETWORK, and SECURITY menus.
BASIC MENU consists of commonly used features, and the other menus are
organized by purpose and brought together in the ADVANCED MENU.
Each of these menus can be controlled using the same methods. When the
projector is displaying any of the menus, the MENU button on the projector also
controls the cursor buttons. Basic menu operation follows.
In the BASIC MENU
MENU button
(Cursor buttons)
SELECT button
Cursor
buttons
(continued on next page)
(1) Use the ▲/▼ cursor buttons to highlight a menu.
If you want to go to the BASIC MENU, select the
BASIC MENU.
The items in the menu appear on the right side.
(2) Press the ► cursor button or SELECT button to
move the cursor to the right side. Then use the
▲/▼ cursor buttons to select an item to operate and press the ► cursor
button or SELECT button to progress. The operation menu or dialog of
the selected item will appear.
(3) Use the buttons as instructed in the OSD to operate the item.
In the ADVANCED MENU