Operation Manual
51
OPTION menu
Item Description
CUSTOM KEY
This item assigns one of the following features to CUSTOM on the
remote control (
6).
(1) Use the ▲/▼ buttons on the CUSTOM KEY menu to select a
CUSTOM KEY and press the ► or SELECT button to display the
CUSTOM KEY setup dialog.
(2) Then using the ▲/▼/◄/► buttons sets one of the following
features to the chosen button. Press the SELECT button to save
the setting.
• BLANK: Displays an empty screen.
• MUTE Turns off all sound.
• ASPECT RATIO: Sets the ratio of image width to image height.
• SOURCE: Cycles through available sources.
• AUTO IMAGE: Resychronizes the projector to the source.
• FREEZE: Pauses the projected image.
• MAGNIFY: Magnies the projected image.
• SOURCE INFO: The default action. Shows the Source Info
menu.
• SERVICE INFO: Shows the Service Info menu.
• AV MUTE: Turns the image and audio on and off.
• RULED LINES: Makes the pattern selected in the RULED
LINES item appear or disappear.
•
SLIDESHOW: Selects the
USB TYPE A
input, and starts a Slideshow.
• MY IMAGE: Displays the MY IMAGE menu.
• MESSENGER:
Turns the messenger text displayed on the screen on
and off
(
Messenger Feature in the Network Guide
).
When there is no transferred text data to display, the message
"NO MESSENGER DATA" appears.
• AUTO KEYSTONE: Performs automatic keystone distortion
correction.
• ACTIVE IRIS: Changes the active iris mode.
• RESET FILTER HOURS:
Displays the lter hours reset conrmation
dialogue
.
• RESOLUTION: Turns the RESOLUTION dialog on and off.
• MIC VOLUME: Turns the MIC VOLUME dialog on and off.
• LOW POWER: Turns the LOW POWER dialog on and off.
SOURCES
Enables or disables Source Keys on the optional Commander-2
remote.
POWER-UP
SOURCE
Determines which source the projector checks rst for active
video during power-up.