Operation Manual
62
SCREEN menu
Item Description
SOURCE NAME
Each input port for this projector can have a name applied to it.
(1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE
NAME and press the ► or
ENTER
button.
The SOURCE NAME menu will be displayed.
(2) Use the ▲/▼ buttons on the SOURCE
NAME menu to select the port to be
named and press the ► button. The
SOURCE NAME dialog will be displayed.
The right side of the menu will remain
blank until a name is specied.
(3) Select an icon you would like to assign to
the port in the SOURCE NAME dialog.
The name assigned to the port will also
automatically change based on your icon
selection. Press the
ENTER
or
INPUT
button to make your icon selection.
(4) Select the number you would like to
assign to the port along with the icon.
You can select the 1, 2, 3, 4 or blank (no
number assigned).
Then press the
ENTER
or
INPUT
button.
(5) If you would like to modify the name assigned
to the port, select CUSTOM NAME and press
the
ENTER
or
INPUT
button.
(continued on next page)