Operation Manual
69
OPTION menu
Item Description
SERVICE
Select this to display the SERVICE menu.
Select an item using the ▲/▼ buttons,
and press the ► button or the
ENTER
button on the remote control to perform
this item.
ALTITUDE
Using the ▲/▼ buttons switches the rotation speed of the
cooling fans. We recommend leaving it set to AUTO under most
circumstances
HIGH-2
ó
HIGH-1
ó
NORMAL
ó
AUTO
AUTO: The projector changes the rotation speed automatically to
accomodate for altitude and other environmental factors.
When there is trouble with the AUTO mode, choose one of
the options below.
NORMAL: This mode can be used below 1600m (5250ft.).
HIGH-1: This mode can be used between 1600 to 2300m (5250 to
7550ft.).
HIGH-2: This mode can be used above 2300m (7550ft.).
AUTO ADJUST
Using the ▲/▼ buttons selects one of the modes. When DISABLE
is selected, the automatic adjustment feature is disabled.
FINE
ó
FAST
ó
DISABLE
FINE: Finer tuning including H.SIZE adjustment.
FAST: Faster tuning. Sets the H.SIZE according to a table of preset
data based on the input signal.
• Depending on a variety of conditions, such as the input image,
cables, and projector environment, etc., the automatic adjustment
function may not work correctly. In this case, choose DISABLE to
disable automatic adjustments, and make adjustments manually.
GHOST
(1) Select the ghost's color element using
the ◄/► buttons.
(2) Adjust the selected element using the ▲/▼ buttons to eliminate
the ghost.
(continued on next page)