Operation Manual
12
Setting up
Connecting your devices (continued)
(continued on next page)
• If an oversized USB storage device blocks the LAN port, only use the
USB TYPE A port furthest from the LAN port or use a USB extension cable to
connect the USB storage device.
NOTE
► Before connecting the projector to a network system be sure
to obtain the network administrator's approval.
►
Do not connect the LAN port to any network that might have excessive voltage.
►
The designated USB wireless adapter that is sold as an option is required to use
the wireless network function of this projector. Before connecting the USB wireless
adapter, turn off the projector's power and disconnect the power cord. Do not use
any extension cable or device when connecting the adapter to the projector.
►
Before removing the USB storage device from the port of the projector, be sure
to use the REMOVE USB function on the Thumbnail screen to protect your data
(97).
►To connect both the LAN cable and USB device to the projector, only use the
USB TYPE A port furthest from the LAN port or a LAN cable that is at on the
side where the plug’s wire is visible. Otherwise, both of them cannot be con-
nected correctly, or a wire may break causing a malfunction.
CAUTION
Computer
Access
point
USB
storage
device
USB
wireless
adapter
(optional)
(94, 104)
External
device
(76)
(76)
(76)
(19)
►Heat may build up in the USB wireless adapter. To avoid pos-
sible burns, disconnect the projector power cord for 10 minutes before touching
the adapter.
►
When using the USB wireless adapter, be sure to connect the adapter to the USB
TYPE A port furthest from the LAN port and use the supplied adapter cover (15).
WARNING