Operation Manual

16
You can adjust or control the projector via a network from a web browser on a
computer that is connected to the same network.
• Internet Explorer
®
6.0 or later is required.
• If JavaScript
®
is disabled in your web browser conguration, you must enable
JavaScript
®
in order to use the projector web pages properly. See the Help les
for your web browser for details on how to enable JavaScript
®
.
• We recommend that all web browser updates are installed.
• If data is transferred via wireless and wired LAN simultaneously, the projector
may not be able to process the data correctly.
NOTE
3. Web Control
3. Web Control
Refer to the following for conguring or controlling the projector from a web
browser.
Make sure that both your computer and projector are connected to the network,
and then open the Web browser.
Enter the projector's IP address into URL input box of the Web browser as per the
example below, and then press the Enter key or button.
Example: If the IP address of the projector is set to 192.168.1.10:
Enter “http://192.168.1.10/” into the address bar of the web browser
and press the Enter key or click button.
If the URL is entered correctly and
the projector and your computer
are connected to the same network
correctly, the selection window as
shown on the right will be displayed.
You can choose to use Projector Web
Control or Crestron e-Control® as a tool
for controlling the projector. Click one of
them.
For more details, refer to 3.1 Projector
Web Control (&17) or 3.2 Crestron
e-Control
®
(&42).
• Do not attempt to control the projector with the projector's menu or
remote control, and via Web Control simultaneously. Some operational errors
may occur.
• If Crestron e-Control in the Network Settings (&21) is set to Disable, the
selection window above will not appear. The Logon window of the Projector
Web Control will display instead.
• Crestron e-Control
®
is created using Flash
®
. You need to install the Adobe
®
Flash
®
Player on your computer to use Crestron e-Control
®
.
NOTE