Operation Manual

63
SCREEN menu
Item Description
SOURCE NAME
(
continued
)
(6) The current name will be displayed on
the rst line. Use the ▲/▼/◄/► buttons
and the
ENTER
or
INPUT
button to
select and enter characters. To erase 1
character at a time, press the
RESET
button or press the ◄ and
INPUT
button
simultaneously. Also if you highlight
DELETE or ALL CLEAR on screen and
press the
ENTER
or
INPUT
button, you
can erase one character or all characters
at a time. The name can be up to 16
characters.
(7) To change an existing character, press
the ▲ button to move the cursor to the
rst line, and use the ◄/► buttons to
highlight the character to be changed.
After pressing the
ENTER
or
INPUT
button,
the character is selected. Then, follow
step (6) as per above.
(8) To nish entering text, move the cursor to OK on the screen and
press the ►,
ENTER
or
INPUT
button. To revert to the previous
name without saving changes, move the cursor to CANCEL on
the screen and press the ◄,
ENTER
or
INPUT
button.
TEMPLATE
Using the ▲/▼ cursor buttons switches the mode for the template
screen.
Press the ► cursor (or the
ENTER
) button to display the selected
template, and press the ◄ cursor button to close the displayed
screen.
The last selected template is displayed when the
MY BUTTON
allocated to the TEMPLATE function is pressed (

68
).
TEST PATTERN
ó
DOT-LINE1
ó
DOT-LINE2
ó
DOT-LINE3
 
STACK
ó
MAP2
ó
MAP1
ó
CIRCLE2
ó
CIRCLE1
ó
DOT-LINE4
You can turn a map upside down and scroll it horizontally when
MAP1 or MAP2 is selected. To invert or scroll the map, when MAP1
or MAP2 is displayed, press the
RESET
button on the remote at
least three seconds to display the guides.
(continued on next page)