Operation Manual

Setting up

Arrangement (continued)

►Place the projector in a cool place with sufcient

ventilation. The projector may shutdown automatically or may malfunction if its

internal temperature is too high.

• Using a damaged projector could result in a re and an electric shock.

• Do not place the projector in direct sunlight or near hot objects such as heaters.

• Do not place the projector where the air from an air conditioner or similar unit

will blow on it directly.

• Keep a space of 30 cm or more between the side of the projector and other

objects such as walls.

• Do not place the projector on carpet, cushions or bedding.

• Do not plug, block or cover the projector's ventilation holes. Do not place

anything around the projector that could be sucked in or stick to the projector's

intake vents.

• Do not place the projector where it can be exposed to magnetic elds. Doing

so can cause the cooling fans inside the projector to malfunction.

►Avoid placing the projector in smoky, humid or dusty places. Placing

the projector in such places could cause a re, an electric shock and projector

malfunction.

• Do not place the projector near humidiers. In particular, ultrasonic humidiers

atomize chlorine and minerals from the tap water and can leave deposits inside

the projector causing image degradation and other problems.

• Do not place the projector in a smoking area, kitchen, passageway or by a

window.

• Position the projector to prevent light from directly hitting the

projector's remote sensor.

• Do not place the product in a place where radio interference may be caused.

• Set the ALTITUDE of the SERVICE item in the OPTION menu correctly. We

recommend leaving it set to AUTO under normal circumstances (69). If the

projector is used with a wrong setting, it may damage the projector itself or the

parts inside.

• Keep heat-sensitive items away from the projector. Otherwise, they may be

damaged by the heat from the projector.

CAUTION

NOTICE