Operation Manual

45
PICTURE menu
Item Description
COLOR TEMP
Using the ▲/▼ buttons switches the color temperature mode.
To adjust CUSTOM
Selecting a CUSTOM mode and then
pressing the ► button or the
ENTER
button displays a dialog to aid you in
adjusting the OFFSET and GAIN of the
selected mode.
OFFSET adjustments change the color intensity on the whole tones
of the test pattern. GAIN adjustments mainly affect color intensity on
the brighter tones of the test pattern.
Choose an item using the ◄/► buttons, and adjust the level using
the ▲/▼ buttons.
You can display a test pattern to check your adjustments by
pressing the
ENTER
button.
Each time you press the
ENTER
button, the pattern changes as per
below.
No pattern
ð
Gray scale of 9 steps
Ramp

Gray scale of 15 steps
• Lines or other noise may appear on the screen
when this function is operated, but this is not a
malfunction.
COLOR
Using the ◄/► buttons adjusts the strength of the whole color.
Weak
ó
Strong
• This item can only be selected with a video, s-video and
component video signal.
• For an HDMI
TM
signal, this item can also be selected if either (1) or
(2) applies.
(1) HDMI FORMAT item in the INPUT menu for selected port is set
to VIDEO.
(2) HDMI FORMAT item in the INPUT menu for selected port is set to
AUTO, and the projector recognizes that it receives video signals.
TINT
Using the ◄/► buttons adjusts the tint.
Reddish
ó
Greenish
• This item can only be selected for a video, s-video and component
video signal.
• For an HDMI
TM
signal, this item can also be selected if either (1) or
(2) applies.
(1) HDMI FORMAT item in the INPUT menu for selected port is set
to VIDEO.
(2) HDMI FORMAT item in the INPUT menu for selected port is set to
AUTO, and the projector recognizes that it receives video signals.
(continued on next page)
1 HIGH

1 CUSTOM

2 MID

2 CUSTOM 3 LOW
5 CUSTOM
 
4 CUSTOM
6 CUSTOM
 
3 CUSTOM
 
4 Hi-BRIGHT-1

5 Hi-BRIGHT-2
6 Hi-BRIGHT-3