Operation Manual

18
Remote control
BLANK LASER
FREEZE
LASER
INDICATOR
DIGITAL
STANDBY/ON COMPUTER
LENS SHIFT
KEYSTONE
ID 3
ID 4
ID 2
ID 1
VIDEO
AUTO
ASPECT
RESET
MENU
MAGNIFY
ON
OFF
3
4
ENTER
FOCUS
+
-
POSITION
PbyP
ZOOM
+
-
1
2
MY BUTTON
MY SOURCE
SHUTTER
Using as a wired remote control
The accessory remote control works as a wired remote control,
when the wired control port at the bottom of the remote control
is connected to the REMOTE CONTROL port on the back of the
projector via a 3.5mm stereo audio cable.
This function is useful when a wireless remote signal
may not reliably reach the projector.
• To connect the remote control with the projector, use an audio cable
with 3.5 diameter stereo mini plugs.
NOTE
I O
HDMI DVI-D
CONTROL IN CONTROL OUT
REMOTE
CONTROL
IN
OUT
S-VIDEO
COMPUTER IN2
COMPUTER IN1
VIDEO 1
BNC
R/Cr/Pr G/Y B/Cb/Pb H
V VIDEO 2
Y
Cb/Pb
Cr/Pr
AC IN
LAN
MONITOR
OUT
BLANK LASER
FREEZE
LASER
INDICATOR
DIGITAL
STANDBY/ON COMPUTER
LENS SHIFT
KEYSTONE
ID 3
ID 4
ID 2
ID 1
VIDEO
AUTO
ASPECT
RESET
MENU
MAGNIFY
ON
OFF
3
4
ENTER
FOCUS
+
-
POSITION
PbyP
ZOOM
+
-
1
2
MY BUTTON
MY SOURCE
SHUTTER
Laser pointer
Instead of using a nger or pointer, the remote control's laser pointer can be used.
When the LASER button is pressed, the laser beam and the LASER INDICATOR
lights.
►Only use the remote control's laser beam to point at the
screen. Do not point the laser beam at anything except the screen.
• Never hit eyes with the laser beam since the laser beam can injure eyes.
• Do not point the laser beam at anything except the screen.
WARNING
AVOID EXPOSURE-
LASER RADIATION IS EMITTED FROM THIS APERTURE
C A U T I O N
LASER RADIATION-
DO NOT STARE INTO BEAM
MAX. OUTPUT: 1mW
WAVE LENGTH: 650nm
CLASS2 LASER PRODUCT
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS2 LASER PRODUCT
MAX OUTPUT : 1mw
WAVE LENGTH : 650nm
IEC60825-1 :2007 EN60825-1:2007
レーザ光
ビームをのぞきこまないでください。
最大出力 １ｍW
波長 ６５０
n m
クラス２レーザ製品
JIS C 6802:2005
AVOID EXPOSURE-
LASER RADIATION IS EMITTED FROM THIS APERTURE
C A U T I O N
LASER RADIATION-
DO NOT STARE INTO BEAM
MAX. OUTPUT: 1mW
WAVE LENGTH: 650nm
CLASS2 LASER PRODUCT
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS2 LASER PRODUCT
MAX OUTPUT : 1mw
WAVE LENGTH : 650nm
レーザ光
ビームをのぞきこまないでください。
最大出力 １ｍW
波長 ６５０
n m
クラス２レーザ製品
JIS C 6802:1997/98
IEC60825-1 :1993 + A1 : 1997 + A2 : 2001
LASER INDICATOR
LASER button
Laser aperture
or
Using the REMOTE ID function
This function denes which projector is controlled by the remote control. Utilize this
function when you use multiple projectors of the same type simultaneously.
1.
Set the ID number to the projector beforehand,
referring to the item “REMOTE ID” item (52).
2.
Press a ID button on the remote control. The ID button
selected will light for 3 seconds.
• Each time you press any button (except ID buttons), the ID button of
current selected ID number will light.
• To conrm the projector's current ID, press any ID button for 3 seconds. Its
number will be shown on each screen regardless of set ID of projector.
NOTE
BLANK LASER
FREEZE
LASER
INDICATOR
DIGITAL
STANDBY/ON COMPUTER
LENS SHIFT
KEYSTONE
ID 3
ID 4
ID 2
ID 1
VIDEO
AUTO
ASPECT
RESET
MENU
MAGNIFY
ON
OFF
3
4
ENTER
FOCUS
+
-
POSITION
PbyP
ZOOM
+
-
1
2
MY BUTTON
MY SOURCE
SHUTTER