Operation Manual

Page 27INF8511 Hardware Guide

LED Indicators

FRONT LED

(near IR sensor)

PC LED

(back of the display)

SOLUTION

Red Off • The display is powered off.

Orange Blinking Green • The display is in standby mode. Press the Power button on the

remote or keypad.

Green Green • The display is powered on.

Off Off • The system does not have power. 1) Verify the power cord is

properly connected to the power outlet and to the display; 2)Verify

that the power switch on the back of the unit is turned on; 3) Plug

another electrical device to the power outlet to verify that the

outlet is supplying the proper voltage.

For additional troubleshooting support, please contact:

InFocus Corporation - Technical Support

6am-5pm PST

877-388-8385