M812i Quick Start Guide
Introduction Content Thank you for choosing InFocus M812i. Before using the phone, is advised that you read this Quick Start Guide to better understand the basic functions. Your Phone ............................................... 2 Installing SIM Card and Memory Card ...... 3 Charging the Battery ................................. 4 Initial Start Up ............................................ 4 Home Screen ............................................ 4 Making Your First Call ...........................
Your Phone Proximity sensor Memory cardtray/Nano SIM Earpiece Headset jack Front camera Rear camera LED flash Power button Volume (+/-) button Touch screen NFC Remark: If you want to use a screen protector, please make sure the proximity sensor is not blocked.
Installing SIM Card and Memory Card 4. Find the small opening on the upper part of the phone. 1. Find the small opening on the right bottom side of the phone. 5. Use the pin provided to eject the tray, and pull out the tray with your thumb and index finger. 2. Use the pin provided to eject the tray, and pull out the tray with your thumb and index finger. 6. Put the micro SD card onto the tray, metal pin face downwards, and insert the tray back to the phone. at the bottom tiny hole 3.
Charging the Battery Initial Start Up Before you turn on the start using InFocus M812i, it is recommended that you charge the battery with the power adapter and USB cable provided in the gift box. When you switch on M812i for the first time, please indly follow the onscreen instructions to set up your personalization. Some features might require internet access in order to synchronize your online account and location-based services. You can also enable or disable them in settings later on. 1.
Making Your First Call To answer a call From the Home screen, tap To answer a call, tap . and drag it to the right To make a call 1. Enter the phone number on the keypad. 2. Tap to correct any wrong number. Tap and hold to erase the entire entry. NOTE: To call a contact, tap from the contact list. 3. Tap to o make a call. 4. To hung up, tap . NOTE: If you have inserted two SIM cards, select the desired SIM network. NOTE: When you tap 5 , it automatically changes to . .
Contacts Importing contacts Adding contacts 1. From the Home screen, tap . 2. Tap > Import/ Export, and choose to Import/export contacts from or to the SIM card/ storage. 3. Select the contacts location that you want to copy to or copy from, and tap . 1. From the Home screen, tap . 2. Tap to add a contact. 3. Select one of the location to store the contact to (SIM-only or Phone-only). 4. Enter the contact information such as name, phone number, email address, etc. 5. Tap to save the contact.
Sending a Text Message Setting up WLAN 1. From the Home screen, tap . 2. Tap . 3. In the To field, enter the recipient’s phone number or name. 4. Compose your message. 5. Tap to send your message. 1. From the Home screen, tap . 2. In WIRELESS & NETWORKS, tap WLAN and turn it to on. 3. Tap the network you want to connect to from the available list. Or tap to manually add a new connection. NOTE: Connecting to a secured network will require for a password. Enter the password, then tap Connect.
Setting up Email Account Sending and Receiving Emails 1. From the Home screen, tap . 2. Enter your Email address and Password and tap Next. 3. Set the Inbox checking frequency settings and tap Next. 4. Enter Name and Account display name. 5. Tap Next. Once the account setup is complete, the device will automatically retrieve your emails. Composing and sending emails 1. From the Home screen, tap, tap an email account. 2. Tap . 3. In the To field, enter the recipient’s email address. 4. Enter the Subject.
Receiving emails Using Browser The device will auto magically refresh the incoming emails according to the synchronization frequency defined. To open a web page 1. From the Home screen, tap . 2. Tap the address bar. 3. Type the URL then tap Go. 4. Tap to open New page with . 5. Tap to save the URL as a bookmark.
Using Bluetooth Taking Photos 1. From the Home screen, tap . 2. In WIRELESS & NETWORKS, tap Bluetooth and turn it on. 3. Refresh the list if you cannot find desired devices. 4. Tap the device you want to pair. 5. To start pairing, enter the PIN then tap OK. This device is equipped with rear and front cameras for both photo taking and video recording. 1. From the Home screen, tap . NOTE: To switch between front and rear NOTE: cameras, tap • The PIN of the device must be the same PIN on the other . 2.
To record video To take a panorama shot 1. From the Home screen, tap . 2. When you are ready to start recording, tap . 1. From the Home screen, tap . 2. Tap and select Panorama. 3. When you are ready, tap to take the shot. 4. Move the device horizontally and smoothly to one direction. NOTE: To switch between front and rear cameras, tap . 3. Tap to stop recording. 5. When the shooting guide reaches the end of the shooting point, the shooting stops. You can also manually stop recording by tapping .
• If want to share the video/ photo, please enter to share. • If want to delete the video , please press then select Delete and then click OK. • To play the video, tap . • If you want to upload files to cloud storage, press then select Upload and sign into the clouds album. • To play the slideshow for more options, tap . • To edit the image, tap for special effect. Viewing Photos and Videos 1. From the Home screen, tap . 2. Select the folder to glance pictures and videos in thumbnail images. 3.
Basic Phone Settings Setting an alarm Adjusting the volume 1. From the Home screen, tap . 2. Tap . 3. To add an alarm, tap . 4. To set the time, slide the pointer, and tap Done. 5. To set repeat mode, check Repeat and select the desired week days. 6. To set the ringtone, tap , and select the alarm ringtone. 7. To enter an alarm label, tap Label tap label to name toe arm. Tap OK to save.
The result is displayed as follows: Change desktop mode Under the two layer mode, all applications on theoriginal desktop can be accessed through hot seat button. 1. Long press the empty space on the home screen. 2. Tap . The Launcher + page opens. 3. Tap Layer mode setting tab. 4. Choose One layer or Two layers.
Important Safety Information • Refer to the rating label on the device and be sure that the power adapter complies with the rating. Only use accessories provided by the manufacturer. • Disconnect the device from an electrical outlet and power off before cleaning the device. • NEVER attempt to connect or disconnect the power adapter with wet hands. • Clean the touch screen with a soft cloth. If needed, dampen the cloth slightly before cleaning. Never use abrasives or cleaning solutions.
• The temperature of the device might increase while the CPU is busy handling resource consuming activities such as high resolution video decoding. The SW protection mechanism will ensure stop charging whenever the temperature is over the predefined threshold and prepare for shut down if necessary. Please worry not. • Use a wireless hands-free system (headphone, headset) with a low power Bluetooth emitter. • Make sure the cell phone has a low SAR.
Copyright Information Intellectual Property Right Information Right to all technologies and products that comprise this device are the property of their original owners respectively. This product has an Android™ platform based on Linux, which can be expanded by a variety of Java-Script-based application SW. • Copyright© InFocus Corporation, 2014. All rights reserved. • This product has an Android™ platform based on Linux, which can be expanded by a variety of JME-based application SW.
guidelines for use of the device at the ear is 0.701 W/kg and at the body is 0.591 W/kg (The measure distance of 1.5 cm). Use of device accessories and enhancements may result in different SAR values. SAR values may vary depending on national reporting and testing requirements and the network band. Compliance Information SAR Information THIS MOBILE DEVICE MEETS GUIDELINES FOR EXPOSURE TO RADIO WAVES. Your mobile device is a radio transmitter and receiver.
RoHS Compliance Warranty Statement This product is in compliance with DIRECTIVE 2011/65/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 8 June 2011,on the restriction of the use of certain hazardous substances in electrical and electronic equipment and its amendments. Limited warranty InFocus provides “Product Warranty Statement”, at the time of its original purchase, from the InFocus or its authorized distributor, describing the product warranty service.
programs, data, or removable storage media inside or sent with the products. As to Non-warranty product, InFocus will check if a repair is economical/ available and provide a chargeable service to customer’s consideration.
i
PKVN255002A
