User's Guide Part 1

10
Connecting a computer source
DisplayLink or VESA
If you have a Windows or Macintosh computer, connect the USB cable
between your computer's USB port and the projector's DisplayLink
connector*. Then to begin installation of the DisplayLink software:
Windows: Follow the instructions on the screen.
Macintosh: A folder will open containing a file named DisplayLink
I
nstaller.pkg. Open that file and follow the instructions on the screen.
* For detailed DisplayLink instructions and troubleshooting, and to
do
wnload the latest DisplayLink software, go to www.infocus.com/
support/displaylink.
Or, connect one end of the provided computer cable to the VG
A 1 or VGA 2
connector on the projector and the other to the VESA connector on your
computer. If you are using a desktop computer, you will need to disconnect
the monitor cable from the computer’s video port first (you can connect this
monitor cable to the Monitor Out connector on the projector, see below).
Connect the black power cord to the Power co
nnector on the side of the
projector and to your electrical outlet. The Power light on the Status
Indicator Panel (page 20) turns amber.
NOTE: Always use the power cord that shipped with the projector.
Optional computer connections
To get sound from the projector, connect an audio cable (optional cable, not
included) to your computer and to the Audio In Computer connector on the
projector. You may also need an adapter.
If you are using a desktop computer and want to see the image on your
comput
er screen as well as on the projection screen, connect the computer’s
monitor cable to the Monitor Out connector on the projector.
NOTE : Only VGA video is sent to the Monitor out connector.
To display a presentation from a USB flash drive, see the Using LitePort
section on page 43. This feature is eliminates the need for a computer source
and can be integrated with common wall plates and conference room
in
put/output panels.
To advance slides in a PowerPoint presentation using the remote control,
plug
the USB cable between the projector's DisplayLink connector and your
computer. Then press the up and down arrow buttons on the remote control
to move through your slides.
MOLEX
MOLEX
connect USB cable
connect computer cable
connect power cord
connect audio cable
connect monitor cable