User's Guide Part 2

31
Optimizing computer images
After the projector is running and the image is on the screen, you can
optimize the image using the onscreen menus. For general information on
using the menus, see page 33.
• Adjust the Keystone, Contrast, or Brightness in the Basic Picture menu
(page 34).
• Change the Aspect Ratio. Choose the option that best fits your input
so
urce (page 34).
• Adjust the Color Temperature in the Advanced Picture menu
(page 34).
• Adjust the Phase, Tracking, or Horizontal or Vertical position in the
A
dvanced Picture menu (page 35).
• Once you have optimized the image for a particular source, you can
sa
ve the settings using Presets. This allows you to quickly recall these
settings later (page 34).
• If your computer is using the projector's DisplayLink connector, see the
InFocus DisplayLink Manager User's Guide for information about
optimizing images.
NOTE: To achieve maximum contrast, you can disable LiteBoard pen use.
To do this, set Enabled to No in the LiteBoard Pen submenu in the Setup
menu. See page 16 for help with this menu adjustment.
Presentation features
Several features are provided to make giving presentations easier. Here is
an overview, details are found in the menu section.
• The Custom key allows you to assign various features to the button.
The default effect is Source Info, which displays information about the
projector and current source. See page 36 for details.
• The Search Screen option lets you change the appearance of the blank
screen and start up screen (page 37).
• Two options, Auto Off and Screen Save Time, are provided to
a
utomatically shut down the projector after several minutes of
inactivity or display a black screen. This helps preserve lamp life
(page 36).