User's Guide Part 3

Loosen the captive screw that attaches the lamp housing to the

projector. Carefully remove the lamp housing. Dispose of the lamp in an

environmentally proper manner.

5 Install the new lamp housing and tighten the screw.

6 Re-attach the lamp connector to the projector.

7 Replace the lamp door by sliding it into place.

8 Plug in the power cord and press the Power button to turn the projector

back on.

9 To reset the lamp hour timer, navigate to the Status and Service menu and

select Reset Lamp Hours. See page 38 for details.

Using the security lock

The projector has a security lock for use with a PC Guardian Cable Lock

System. Refer to the information that came with the lock for instructions on

how to use it.

loosen screw

security lock