User manual
41
4
Loosen the two captive screws that attach the lamp housing to the pro-
jector.
5 Detach the lamp connector from the projector by depressing the locking
tab on the connector and lightly pulling it free.
WARNING:
To avoid burns, allow the projector to cool for at least 30 minutes
before you replace the lamp.
Do not drop the lamp housing or touch the glass bulb! The glass
may shatter and cause injury.
Be extremely careful when removing the lamp housing. In the
unlikely event that the bulb ruptures, smataente sma b-15.4(031 e )]TJ0 -1.2.88 TD0.3116 Tc0.0217 Twgaw e mp6-1.soeieiawaweth-11.ese2( fg)14.7g
e5tdjto cst-3oooe3mimao th710.5(e(t)8.2(a9)8.5(mpe5)9.2(-3)1.us(t)-5.ima)-5.5(o)-7.gite3 for8