INSTRUCTION BOOK FOR DELUXE pull up floor screen sc-pu-100 sc-puw-73 sc-puw-90 InFocus Corporation 13190 SW 68th Parkway Suite 200 Portland, OR 97223 www.InFocus.
INTRODUCTION PARTS IDENTIFICATION Thank you for purchasing this InFocus product. Before attempting to use it, make sure to carefully read the contents of these instructions. 1. Lifting Handle 11. Slat 2. Slat handle 12. Long arm 3. Screen film 13. Upper arm hinge 4. Skirt film 14. Short arm 5. Left end cap 15. Lower arm hinge 6. Rotating foot 16. Air shock 7. Bottom case 17. Case handle 8. Right end cap 18. Extending Handle 9. Case cover CAUTION! (90" and 100" only) 10. Case latch 1.
4. Place the end of the extending handle under the slat handle as shown below and raise screen to desired height. (100" model only) SETTING UP THE SCREEN 1. Rotate feet until they are perpendicular with the case. 2. Release the latches and open the case cover. On the 90" and 100" models remove extending handle and extend it as shown. Note: Push lightly down on the center of the case to release the latches. STORING THE SCREEN 5. Grasp the Slat Handle and lower the screen slowly back into the case.
On 90" and 100" models only 7. Collapse the extending handle by pressing on the button as shown and sliding the two halves together. Store extending handle in case. SPECIFICATIONS Dimensions: see drawing 60" 73" and 80" Shipping dimensions: 6-1/4" x 7" x 61-1/2" 6-1/4" x 7" x 77-1/8" Weight of unit: 14.0 Lbs. 16.4 Lbs. Shipping weight: 17.3 Lbs. 20.4 Lbs. 90" and 100" Shipping dimensions: 6-1/4" x 7" x 91-1/4" Weight of unit: 19.8 Lbs. Shipping weight: 23.8 Lbs.