In Focus corp ORATION 277008 5 W. Parkway Ave. Jacksonville, Dragon 97070-6215 1-800-284-6400 www.infocus.com SP-CAL-005 / SP-CEIL-005B DIGITAL PROJECTOR MOUNT Installation Instructions These are the installation instructions for your Digital Projector Mount. Included are four methods of installation. Select the method that works best for your viewing situation. The methods are: = Fixed Height Ceiling Installation— bast for short reffing.
Tools Needed for Installing the Digital Projector Mount Getting the projector ready Yous need the flowing foals to install he Digital Projector Mount: Before you start fhe installation process, prepare your Digital Projector by permitting #16 showing steps + Philips head screwdriver (not included) (Fistulous 1). «Allen mensch (included) t. Tum the projector (C) upside down and place it on a clean fla surface, preferably on 8 towel.
Remove (48) Hex had sores, flat washers and star ack washers rr Remove the enter extension from the assembly Remove) Hex head screws, fiat washers aid Sar o/ .
Adjustable Height Ceiling Installation Complete the flowing steps fo install the projector towns and proletariat on your ceding with fre optional suspension adapter. This installation works best with high ceilings (FIGURE 3). Mote: Look at he bottom of the upper assertively (D) and locale the arrow, Marks sue you install the projector mount with the act pointing toward yous serene, 6 Use he Allen wrench {F} 0 reverent the upper plate from the mount assembly {D) 7.
Wall Mount Installation Complete tha following steps ta install the projector mount and projector 10 your wall. (FIGURE 4) Note: Look at the bottom af the upper assembly {D) and locate fe arrow. Make sum you install the projector mount with the arrow pointing toward your screen. NOTE: Follow step 3 fo secure the extension to the mount assembly.