Installation instructions

Installation Instructions SP-WALLKIT-02
Visit the InFocus support site at www.infocus.com/support 17
Security Screw Installation (Optional)
1. Remove eight #8-32 x 1/2" Phillips pan machine screws (F)
from wall bracket covers. (See Figure 45)
Figure 45
2. Install eight #8-32 x 1/2" button head security screws (V)
into holes in wall bracket covers. (See Figure 46)
Figure 46
3. Remove two #8-32 x 1/2" Phillips pan machine screws (F)
holding mount cover on projector arm. (See Figure 47)
4. Install two #8-32 x 1/2" button head security screws (V) into
holes on mount cover. (See Figure 47)
Figure 47
5. Remove two bolts holding stop bracket in place on
underside of short throw projector mount. (See Figure 48)
Figure 48
1
(F) x 8
projector arm not
shown for display
purposes
projector arm not
shown for display
purposes
2
(V) x 8
4
(V) x 2
3
(F) x 2
x 2
5
stop bracket