ENGLISH FCC Warning Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
For complete details on connecting and operating the projector, refer to this User’s Guide. Electronic versions of this User’s Guide in multiple languages are available on our website at www.infocushome.com/support.
Projector components and features Introduction keypad Congratulations and thank you for your excellent choice of a superior digital image projection device. Your new ScreenPlay™ 5700 projector from InFocus® is specifically designed for home cinema applications. The ScreenPlay 5700 sets the standard for Enhanced-Definition digital perfection, featuring true Enhanced Definition 1024x576 resolution using the latest DLP™ technology and new DCDi video processing from Faroudja™.
Connector Panel The projector provides eight discreet video connectors: • two component RCA • two S-video • one composite RCA • one M1-DA (HD, DVI, and computer) • one VESA (HD, HD component, and computer) • IR input video/computer 1&2 s-video 1 Y M1-DA 1 IR in vesa 2 Pr 3 component one component D5 power connector Two 3.5 mm mini-jack triggers provide 12 volt current. Trigger 1 provides a constant output while the projector is on.
Positioning the projector There are a number a factors to consider when determining where to set up the projector, including the size and shape of your screen, the location of your power outlets, and the distance between the projector and the rest of your equipment. Here are some general guidelines. 1 Position the projector on a flat surface at a right angle to the screen. The projector must be within 10 feet (3 m) of your power source.
Video connections M1-DA You can connect VCRs, DVD players, camcorders, digital cameras, video games, HDTV receivers, and TV tuners to the projector. (You cannot directly connect the coaxial cable that enters your house from a cable or satellite company; the signal must pass through a tuner first. Examples of tuners are digital cable boxes, VCRs, digital video recorders, and satellite TV boxes. Basically, any device that can change channels is considered a tuner.
Connecting a video device connect component cable If your video device has more than one output, select the highest quality one. DVI video has the best quality, followed by Component video, S-video, and then composite video. If the video device uses component cable connectors, plug the cable’s green connectors into the green component-out connector on the video device and into the green component connector (labeled “Y”) on the projector.
Displaying a video image remove lens cap Remove the lens cap. Press the Power button on the top of the projector. press Power The projector chimes if the chime feature is enabled (page 28). The LED flashes green and the fans start to run. When the lamp comes on, the startup screen displays and the LED is steady green. It can take a minute for the image to achieve full brightness. ? No startup screen? Get help on page 12. Plug in and turn on the video device.
Adjust the zoom or focus rings by rotating them until the desired image size and sharpness are produced. adjust zoom and focus zoom focus If the image is not square, adjust the keystone using the buttons on the keypad. Press the upper Keystone button to reduce the width of the upper portion of the image, and press the lower Keystone button to reduce the width of the lower portion.
Connecting a computer connect computer cable 1 Y IR in M1-DA 1 vesa 2 Y 2 Pb Pr serial control 7 video Pb D5 8 5 s-video trigger 1 trigger 2 Pr 4 3 component 6 component Connect either a VESA cable or M1 cable into the appropriate connector on the projector. Connect the other end to the video port on your computer. If you are using a desktop computer, you first need to disconnect the monitor cable from the computer’s video port.
Shutting down the projector Troubleshooting your setup Power Save If your image appears correctly on the screen, skip to the next section (page 18). If it does not, troubleshoot the setup. The projector has a Power Save feature in the System menu that automatically turns the lamp off after no signals are detected for 20 minutes. After 10 additional minutes with no signal, the projector powers down. If an active signal is received before the projector powers down, the image is displayed.
Problem Solution Result No startup screen Plug power cable in and remove lens cap press Power button Correct image Scre enPla Image not centered on screen Move projector, adjust zoom, adjust height zoom Adjust horizontal or vertical position in Picture>Advanced menu 12 Correct image y
Image not square Adjust keystone on keypad Square image Image does not fit 16:9 screen Change aspect ratio to 16:9 in Picture>Aspect ratio menu Correct image Turn Overscan on in the Picture menu Edges of image distorted Correct image AB AB 13
1. Projected colors don’t match source 2. Colors are washed out or too deep 3. Image from component source appears greenish 1. Adjust color, tint, color temperature, brightness, or contrast in the menus. 2. Pick another gamma setting 3.
Video image “torn” and fragmented Change Video Standard in Picture>Advanced menu AB Lamp won’t turn on, LED blinking red (page 11) Correct image AB Make sure vents aren’t blocked; allow projector to cool for one minute Unplug projector; wait one minute; plug in projector and turn it on: lamp lights Scre enPla blinks red 15 y
Computer-specific troubleshooting Press the Source button Activate laptop’s external port Only startup screen appears A Scre enPla y No computer image, just the words “Signal out of range” A Computer image projected A A or restart laptop Adjust computer refresh rate in Control Panel>Display>Settings>Advanced> Adapter (location varies by operating system) Signa l rang out of e 16 Computer image projected A A
Image fuzzy or cropped AA A Set your computer’s display resolution to the native resolution of the projector (Start>Settings>Control Panel>Display>Settings tab, select 1024x576) Image clear and not cropped A For a laptop, disable laptop monitor or turn-on dualdisplay mode This product is backed by a limited two-year warranty.
Using the keypad buttons Most buttons are described in detail in other sections, but here is an overview of their functions: Power–turns the projector on (page 8) and off (page 8). Menu–opens the on-screen menus (page 21). Select–confirms choices made in the menus (page 21). menu navigation buttons Up/down arrows–navigates to and adjusts settings in the menus (page 21). Auto image–resynchs the projector to the source. Presets–cycles through the 3 available user preset settings (page 24).
Using the remote control backlight button The remote uses two (2) provided AAA batteries. They are easily installed by sliding the cover off the remote’s back, aligning the + and - ends of the batteries, sliding them into place, and then replacing the cover. navigation buttons To operate, point the remote at the projection screen or at the projector (not at the video device or computer). The range of optimum operation is 0 to 30 feet (9.14m).
Optimizing video images Customizing the projector After the video device is connected properly and the image is on the screen, you can optimize the image using the onscreen menus. For general information on using the menus, see page 21. You can customize the projector for your specific setup and needs. See page 27 to page 29 for details on these features. • For rear projection, turn Rear mode on in the Settings>System menu. • Change the Aspect ratio.
Using the menus To open the menus, press the menu button on the keypad or remote. (The menus automatically close after 60 seconds if no buttons are pressed.) The Main menu appears. Use the arrow buttons to move up and down to highlight the desired submenu, then press the Select button. Menu button To change a menu setting, highlight it, press Select, then use the up and down arrow buttons to adjust the value, select an option using radio buttons, or turn the feature on or off using check boxes.
Picture menu To adjust the following five settings, highlight the setting, press Select, use the up and down arrows to adjust the values, then press select to confirm the changes. All menu defaults are listed in a table starting on page 37. increasing keystone Keystone: adjusts the image vertically and makes a squarer image. You can also adjust keystone from the keypad.
16:9 image 16:9 image input 16:9 aspect ratio 9 9 16 16 4:3: resizes the image from its original version to fit a standard 4:3 aspect ratio screen. If you have a 4:3 source on a 16:9 screen, the image is placed in a 16:9 space, so black bars appear at the sides of the image. 4:3 aspect ratio 4:3 image on 16:9 screen 3 9 16 4 Letterbox: preserves the 16:9 aspect ratio. If you have a 16:9 source and screen, the image fills the screen.
Presets: This allows you to customize settings and save the settings to be restored later. To restore the factory default settings, choose Factory Reset in the Settings>Service menu. Presets To set a preset for the current source, adjust the image, select Save Settings in the Presets menu, then choose Save User 1, 2, or 3. You can recall these settings in the future by selecting the appropriate user presets.
Advanced settings The following 4 options are for computer or HDTV sources only. Phase: adjusts the phase of the video signal’s digital conversion. Tracking: adjusts the frequency of the video signal’s digital conversion. Advanced Horizontal/Vertical Position: adjusts the position of the source. TrueLife: This option refers to Faroudja’s TrueLife processing of the image. All standard definition interlaced video signals (composite, S-video and component) are routed through this processor.
Color Space: This option applies to computer and HDTV sources (it won’t appear in the menu for video sources). It allows you to select a color space that has been specifically tuned for the video input. When Auto is selected, the projector automatically determines the standard. To choose a different setting, turn off Auto, then choose RGB for computer sources, choose REC709 for component 1080i or 720p sources, or choose REC601 for component 480p or 576p sources.
Settings menu Sources: allows you to assign a particular input to a specific source key on the remote and enables or disables Autosource. When Autosource is not checked, the projector defaults to the last-used source. If no source is found, a blank screen displays. When Autosource is checked, the projector checks the last-used source first at power up. If no signal is present, the projector checks the sources in order until a source is found or until power down.
Translucent OSD: makes the menus translucent. This prevents the image from being completely covered by the menus while you are making image adjustments. Chime: turn this on to hear a sound when the Power button is pressed. System menu Sleep Timer: allows you to force the projector to automatically shutoff after 4 hours. Power Save: when On, the lamp is automatically turned off after no signals are detected for 20 minutes. After 10 additional minutes with no signal, the projector powers down.
Service: to use these features, highlight them and press Select. Factory Reset: restores all settings (except Lamp Hours) to their default after displaying a confirmation dialog box. Test Pattern: displays a test pattern when the Blank button on the remote is pressed. To select the patterns, use the up/down arrows on the remote or keypad. Service menu Blue Only: turns off the Red and Green portions of the input, allowing you to properly adjust the color balance with a SMPTE color bar pattern.
Replacing the projection lamp The lamp hour timer in the About menu counts the number of hours the lamp has been in use. After 1980 hours, the message “Change lamp” briefly appears on the screen at each startup. To maintain optimal video performance, we recommend changing the lamp after 2000 hours, depending on usage. You can order new lamp modules from your dealer. See “Accessories” on page 32 for information.
WARNINGS: • To avoid burns, allow the projector to cool for at least 60 minutes before you replace the lamp. • Do not drop the lamp module. The glass may shatter and cause injury. • Do not touch the glass lamp screen. Fingerprints can obscure projection sharpness. • Be extremely careful when removing the lamp module. In the unlikely event that the lamp ruptures, small glass fragments may be generated. The lamp module is designed to contain most of these fragments, but use caution when removing it.
Accessories Appendix Specifications Standard Accessories (ship with the projector) Part Number Shipping Box (with packaging) 110-0619-01 Temperature Operating 50 to 95° F (10 to 35° C) at 0 - 7,500 feet Power Cable (country-dependent) 210-0023-xx Non-operating -4 to 158° F (-20 to 70° C) at 0 -20,000 feet Director Remote 590-0567-01 Projection Lamp Module (included in projector) SP-LAMP-006 Lens Cap 505-1247-xx User’s Guide 010-0466-xx Safety Card 009-0659-xx Cable Cover HW-CABLECVR-0
NOTE: Use only approved accessories. Projected image size Table 4: Range of projection distances for a given screen size Red LED behavior and projector errors If the projector is not functioning properly and the red LED is blinking, consult Table 2 to determine a possible cause. There are two second pauses between the blinking cycles. Visit www.infocushome.com/support for more details on the red LED error codes. Projection Distance 16:9 Screen dimensions (inches/m) 27x48 .69x1.22 34x60 .9x1.5 40.5x72 1.
Source compatibility Table 5: Source Compability Video Table 6: Projector Inputs and Outputs Component and RGB HDTV (720p, 1035i, 1080i, 1080p, 1080p-24Hz) DVI/HDCP for digital video and encrypted digital video Component EDTV (480p, 576p progressive scan), SECAM: M, Component, Composite and S-Video standard video (480i, 576i, 576i RGB SCART with adapter, NTSC, NTSC M 4.
Projector dimensions for ceiling mount installations 2.1” 53.7mm 2.3” 57.8mm 8.7” 221.4mm 11.3” 288.1mm 2.6” 64.9mm 4.3” 109.5mm 0.14” 3.6mm 12.3” 312.7mm dimensions of optional cable cover: 12.4 x 3.9 x 3.2” (315 x 100 x 82mm) total length with optional cable cover: 16.2” 411.5mm) 35 8.
A read command returns the range and the current setting, for example: RS-232 terminal specifications Communication configuration To control the projector from an LCD control panel, connect an RS-232 cable to the serial control connector on the projector and set your computer’s serial port settings to match this communication configuration: Setting Value Bits per second 19,200 Data bits 8 Parity None Stop bits 1 Flow control None Emulation VT100 Function Command Response Brightness (BRT?)
Supported commands Function Command Range Default Aspect Ratio ARZ 0-4 0 = Native 1 = 16:9 2 = 4:3 3 = Letterbox 4 = Natural Wide 1 Color Temp TMP 0-2 0 = 9300 1 = 8200 2 = 6500 2 Contrast CON 8-252 128 CCS CCS 0-1 0 Display Messages DMG 0-1 1 Factory Reset (Write only) RST 0-1 n/a Gamma Table GTB 0-4 0 = PC 1 = Video 2 = Film 3 = Bright Room 1 4 = Bright Room 2 2 Green Color Offset GCO 1-63 32 Green Gain GCG 1-63 32 High Power Enable HPE 0-1 0 HPS n/a n/a Aut
Language LAN 0-11 0 = English 1 = French 2 = German 3 = Spanish 4 = Chinese Traditional 5 = Japanese 6 = Korean 7 = Portuguese 8 = Russian 9 = Norwegian 10 = Chinese Simplified 11 = Italian 0 Skintone Bypass Enable SBE 0-1 1 Source SRC 0-7 0 = Video 1, M1 1 = Video 2, VESA 2 = Video 3, Component 1 3 = Video 4, S-Video 1 4 = Video 5, S-Video 2 5 = Video 6, Component 2 6 = Video 7, Composite 7 = Video 8, D5 2 NTSC 2:2 Pulldown Enable NPE 0-1 0 Startup Logo DSU 0-1 1 Noise Reduction Enable
connecting computer 10 power cable 7 video device 7 connector panel 4 contacting InFocus 17 customer service contact information 17 Numerics 12v triggers 4, 34 16x9 4, 13, 20, 22, 23 4x3 23 4x3 aspect trigger 4 A ADC Calibration 29 adjusting image 9, 22 Advanced menu 25 altitude limits 32 Aspect Ratio 22 Auto Power 27 Autosource 27 D D65 colors 9 dimensions of projector 35 Display Messages 27 DVI connector 7 E B error codes 33 Blank Screen 28 blinking green 11 blinking red 11 Blue Only 29 F Factory
image offset 5 image reversed 14 image size matrix 33 image sizes 5 image torn 15 image upside down 14 InFocus website 2 inputs 34 IR repeater 4 O offset 5 only startup screen appears 16 optional accessories 32 Overscan 24 P Phase 25 Picture menu 22 Power button 8 power cable 7, 10 Power Save 11, 28 Presets 24 projection distance 5, 33 projector adjusting height 8 cleaing the lens 29 compatible sources 34 connecting a video device 7 connector panel 4 controlling projection screen 4 customizing 20 dimensio
saving settings 24 security lock 31 setting up 5 shutting down 11 specifications 32 standard accessories 32 troubleshooting 11 System menu 27 T temperature limits 32 Test Pattern 29 Tracking 25 Translucent OSD 28 triggers 4 Troubleshooting 11, 12, 16 TrueLife settings 25 TV tuner 6 R Rear 27 remote control 19 replacing the lamp 30 resetting the lamp timer 31 Resize button 22 RS-232 connecting 4, 10 RS232 specifications 36 V Vertical Position 25 VESA connector 7 video connections 6 video images, optimizi
exposure (cigarette or otherwise), accident, unusual physical or electrical stress, unauthorized modifications (including use of an unauthorized mount), tampering, alterations, or service other than by InFocus or its authorized agents, causes other than from ordinary use or failure to properly use the Product in the application for which said Product was intended.
Upon request of InFocus Corporation or an authorized repair center for InFocus, proof of legal import must accompany the warranty repair Product, otherwise the Product must be returned to the place of original purchase, to the manufacturer (Purchaser must bear all tax, duty and freight), or the Purchaser must bear charges for the warranty repair. Limited Warranty Period The Limited Warranty periods hereof commence on the date of purchase by the end-user customer.
