Projector User Manual

SP8600 User's Manual
Starting and Shutting down the Projector
1.
Connect the power cord to the projector.
Connect the other end to a wall outlet.
The
POWER LED will be on.
2.
Turn on the connected devices.
3. Ensure the POWER LED displays a
solid green and not a flashing green.
Then press the
POWER button to
turn on the projector.
The projector splash screen displays and
connected devices are detected.
4.
If more than one input device is connected, press the SOURCE button to switch among devices.
• PC: Analog RGB
• HDMI 1/2: High Definition Multimedia Interface
• Component: DVD input YCbCr / YPbPr
•
S-Video: Super video (Y/C separated)
•
Composite: Traditional composite video
5.
When the POWER OFF window ap-
pears, press
– 11 –
on the control panel or
Power on the remote control. The pro-
jector turns off.
Caution:
Do not unplug the power cord until the Lamp LED stops flashing–indicating the projector has
cooled down.