Projector User Manual

SP8600 User's Manual
PICTURE>>Basic Menu
Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the
PICTURE>>Basic menu. Press the cursor ▲▼ button to move up and down in the
PICTURE>>Basic menu. Press ◄► to change values for settings.
Note:
Customizing the settings in PICTURE>>Basic menu is only available in User 1/ 2/ 3 mode.
ITEM DESCRIPTION
Press the cursor ◄► buttons to set the Display Mode.
(Range: Movie/ Bright/ Normal/ User 1/ User 2/ User 3)
Display Mode
Press the cursor ◄► buttons to set the User Mode.
(Range: Movie/ Bright / Normal)
User Mode
Brightness Press the cursor ◄► buttons to adjust the display brightness.
Contrast Press the cursor ◄► buttons to adjust the display contrast.
Press the cursor ◄► buttons to adjust the video saturation.
Color
Notes: This function is only available when Component, Composite or S-Video input
source is selected.
Press the cursor ◄► buttons to adjust the video tint/hue.
Tint
Notes: This function is only available when Component, Composite or S-Video with
NTSC system input source is selected.
Press the cursor ◄► buttons to adjust the display sharpness.
Sharpness
Notes: This function is only available when Component, Composite or S-Video input
source is selected.
Press the cursor ◄► buttons to adjust the display flesh tone.
Flesh Tone
Notes: This function is only available when Component, Composite or S-Video input
source is selected.
Press the ENTER button to save all settings. Save Setting
Press the ENTER button to reset all settings to default values. Reset Picture Settings
– 18 –