Operation Manual

Preface
3D Settings
ITEM DESCRIPTION
3D mode Press the cursor ◄► button to to enable or disable 3D Mode.
2D to 3D mode Press the cursor ◄► button to enable or disable 2D to 3D mode.
3D Type
Press the cursor ◄► button to select 96Hz or 120Hz when a 1080p 24Hz "Frame
Packing" 3D format is used.
Sync Invert
Press the cursor ◄► button to enable or disable sync invert. If the image appears to
flutter, look odd or if the image depth looks off or you experience eye strain, turn this
feature on to see if the image improves.
2D to 3D Deep
Press the cursor ◄► button to adjust the depth of the 3D effect. The positive and
negative 3D Z-axis can be adjusted.
2D to 3D Curve
Press the cursor ◄► button to adjust the 3D curve. Selecting different curve options
affects the relative curve (or flatness) of the displayed 3D image.
Side-by-Side
Press the cursor ◄► button to enable or disable 2D Side-by-Side image conversion.
This feature converts 2D images with Side-by-Side formatting into 3D.
Top-and-Bottom
Press the cursor ◄► button to enable or disable 2D Top-and-Bottom image conver-
sion. This feature converts 2D images with Top-and-Bottom formatting into 3D.
Note:
1. By default, when a 3D compatible source is not detected, the 3D submenu items are unavailable.
2. In addition to the projector, you will need a pair of 3D shutter glasses, 3D content, and 3D compati-
ble source (and emitter). Ensure the glasses you choose are consistent with the synchronization
mode you will be using.
3. Different types of glasses (DLP Link and IR shutter glasses) have their own configuration process.
Follow the manufacturer's documentation to set the glasses up correctly.
– 21 –