TD32/TD40 NTSC USER’S GUIDE
Contents Foreword Caution ...................................................................................................................................... 3 Important Safety Information .................................................................................................. 5 Overviewing your the Monitor Viewing the Control Panel ...................................................................................................... 9 Viewing the Connecting Panel .............................
Contents Setting the Picture Changing the Picture Mode .................................................................................................... 29 Adjusting the User Mode.......................................................................................................... 30 Changing the Color Temperature ............................................................................................ 32 Video NR (Noise Reduction) ..................................................................
Caution CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN - TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD. - DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. - SHOCK HAZARD DO NOT OPEN. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK), NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Caution Always be careful when using your the Monitor. To reduce the risk of fire, electrical shock, and other injuries, keep these safety precautions in mind when installing, using, and maintaining your machine. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a damp cloth. 7. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions. 8.
Important Safety Information Follow all operating and use instructions. Unplug the Monitor from the wall outlet before cleaning. Use a damp cloth; do not use liquid or aerosol cleaners. Do not use the Monitor where contact with or immersion in water is a possibility, such as near bath tubs, sinks, washing machines, swimming pools, etc. Never add any attachments and/or equipment without approval of the manufacturer. Such additions can increase the risk of fire, electric shock, or other personal injury.
Important Safety Information Provide ventilation for the Monitor. The unit is designed with slots in the cabinet for ventilation to protect it from overheating. Do not block these openings with any object, and do not place the Monitor on a bed, sofa, rug or other similar surface. Do not place it near a radiator or heat register. If you place the Monitor on a rack or bookcase, ensure that there is adequate ventilation and that you've followed the manufacturer's instructions for mounting.
Important Safety Information Do not overload the wall outlet or extension cords. Overloading can result in fire or electric shock. Do not insert anything through the openings in the unit, where they can touch dangerous voltage points or damage parts. Never spill liquid of any kind on the Monitor. Bend antenna cable between inside and outside building to prevent rain from flowing in. - This may cause water damaged inside the Monitor and could give an electric shock. Ground outdoor antennas.
Important Safety Information When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in additional damage to the unit. Upon completion of any service or repairs to this the Monitor, ask the service technician to perform safety checks to determine that the Monitor is in a safe operating condition.
Viewing the Control Panel OSD Key Position Front Panel OSD key & Function 1 2 3 4 5 6 Input Source Select UP DOWN (See the box below.) Power (Stand By) Remote Sensor Status / Power Indicator LED OSD Key Function INPUT SELECT Select the signal source from multiple input sources such as TV, AV 1, AV 2, S-Video / AV, Component1, Component2, PC and DVI. VOL / CH To change the CHANNEL, Press button first and change the CHANNEL with , buttons.
Viewing the Connecting Panel Back Panel and Jacks < Back panel of the monitor > 10 OWNER'S MANUAL 1 RS-232C To control from PC. 2 DVI For PC, Set top box. 3 PC Sound PC/DVI Audio Input. 4 D-Sub (PC) For PC, Set top box. 5 Component 1, 2 6 Component Sound 7 Speakers For DVD, Set top box. For Component Audio Input. To connect speakers (2CH, Stereo) 8 AV 1 9 AV 2 10 S-Video 11 AV Output 12 AV 3 For DVD, Set top box, S-VHS. To connect other TV or monitor.
Viewing the Connecting Panel 1 RS-232C Jack Connects a control signal from a PC. 2 DVI Input Jack Connects a digital video signal from a DVI output jack of PC or Set Top box. 3 PC Sound Connects a sound signal from PC or DVI. 4 RGB PC Input Jack ( D-Sub ) Connects a video signal from a video output jack of PC. Cables connecting the PC vary according to the type of machine, so contact your product dealer.
Viewing the Remote Control Key Description 1 Power Turn the Monitor on and off. 2 Mute Temporarily cut the sound and restore it. 3 Pre.CH Turn to the previous channel or exit OSD. 4 V.Size Choose the Screen Form. Wide ➔ Panorama ➔ Zoom1 ➔ Zoom2 ➔ 4:3 5 FAVORITE (FAVOURITE) Tune to your next favorite channel. 6 100 Press to tune the channels over 100. 7 INPUT Display the input source list. 8 Menu / Set Display the main OSD menu. Activate your choice in the OSD menu.
Viewing the Remote Control 2 3 1 4 6 5 7 8 9 10 12 11 13 14 16 15 1 MTS Choose the MTS (Stereo) mode. Each time it is pressed, different mode is selected. Mono ➔ Stereo ➔ SAP • You can select only available modes depending on the source. 2 CH INFO Display the current information about time, screen form, source and MTS mode. 3 PICTURE There are 4 picture modes. Standard ➔ Vivid ➔ Mild ➔ User 4 STILL Temporarily freeze the screen and restore it. 5 SOUND Choose the sound equalizer settings.
Viewing the Remote Control Move key : Move the position of PIP window. Left Up Right Up (Start) Left Down Right Down Swap key : Swap the sources of the main screen and PIP window. MODE KEY : Change the PIP window mode. OFF ➔ SMALL ➔ LARGE ➔ TWIN LARGE SMALL TWIN Source key : Change the source of the PIP window. The available sources are shown as below.
Viewing the Remote Control Loading the Batteries 1 Press on the cover and slide in the direction of the arrow. 2 Load two AAA batteries, taking care that the + and - ends face the correct direction. 3 Close the cover until it clicks.
Installation Table Stand Installation (Optional) < The Monitor can be installed on the desk as shown above. > • Table Stand mount minimum allowable clearances for adequate ventilation. 1.18 inch (3Cm) 4 inch(10.16Cm) 4 inch (10.16Cm) 4 inch (10.16Cm) 2.36 inch (5.
Installation Speaker Installation (Optional) • Be sure monitor power is turned off before making any connections. Place the speakers in the position you want. Install the speaker wires on the monitor and speaker. Be sure to connect the positive "+" wire to the "+" input and the negative "-" wire to the "-" input. Connect left monitor input to left speaker and right monitor input to right speaker. Any extra speaker wire length remaining can be bunched into the wire holders provided.
Connecting the TV Cable Connecting the TV Cable 18 1 Connect the TV antenna cable to the TV input jack. Press INPUT button on the remote control and select TV on OSD. 2 Use CH+, CH- button or numeric button to change TV channel for your channel selection. 3 Press Pre.CH button on the remote control to tune the previous channel. 4 Also, you can tune to cable service provided channels using the cable box. For further information regarding cable TV service, contact cable TV service provider(s).
Connecting the VCR Connecting the VCR With S-Video Connect a S-Video cable to the S-Video jacks of the VCR and the Monitor. Connect L (White), R (Red) sound cable (composite) to the sound jacks of the VCR and the Monitor. With AV input Connect a composite cable to the AV video jacks of the VCR and the Monitor. Connect L (White), R (Red) sound cable (composite) to the sound jacks of the VCR and the Monitor. Watching VCR 1 Press INPUT button on the remote control and select Video Sources.
Connecting the DVD Connecting the DVD • Connect the three separate component video cables to the DVD player's Y, Pb and Pr jacks and to the Component jacks on the Monitor. • Connect the audio cable to the DVD player's audio L (White) and R (Red) jacks and to the L and R audio jacks beside the Component jacks on the Monitor. How to use Supported Signals for Component ports Component1 1 Turn on the DVD player. 2 Press INPUT button on the remote control of the Monitor and select Component1 or Component2.
Connecting the Set Top Box How to connect Connect Set Top Box video inputs to AV, COMPONENT, PC or DVI jacks on the Monitor. Audio inputs to Audio sockets beside the L (White) and R (Red) audio jacks which you connect video inputs. How to use Supported Signals Component1 1 Turn on the Set Top Box. 2 Press INPUT button on the remote control of the Monitor and select Component1, Component2, PC or DVI.
Connecting the PC (D-Sub & DVI) Connecting a PC to the Monitor • There are two connectors to connect the Monitor and PC: D-Sub and DVI. • D-Sub Connect a PC (15pin) video cable between the Video Output port on the PC and the PC port on the Monitor. • DVI Connect a DVI-D cable between the DVI Output port on the PC and the DVI port on the Monitor. Pin Configuration 15Pin Signal Cable (based on protruded pin) To watch the PC screen 22 1 Turn on the Monitor and press INPUT button to select the PC MODE.
Displayable Monitor Specification Resolution 640 x 350 640 x 400 640 x 480 800 x 600 Horizontal Frequency (KHz) Vertical Frequency (Hz) 31.468 70.09 37.861 85.08 31.469 70.08 37.927 85.03 31.469 59.94 35.000 66.66 37.861 72.80 37.500 75.00 43.269 85.00 45.913 90.03 53.011 100.04 64.062 120.000 35.156 56.25 37.879 60.31 48.077 72.18 46.875 75.00 53.674 85.06 56.000 90.00 64.016 100.00 832 x 624 49.725 74.55 852 x 480 31.468 60.05 48.363 60.00 56.476 70.
Basic Operation Turning the Monitor On / Off Press the Power button on the remote control. The Monitor will turn on and you will be ready to use its features. You can also use the Power button on the front panel. Select Source Press INPUT button on the remote control. Then you can see the source list menu shown as below. Source Change 1 TV 2 AV 1 3 AV 2 4 S-VIDEO /AV 3 Select the source to watch with CH+/CH- button on the remote control and press the Menu/Set button.
OSD Menu Structure • OSD (On Screen Display) allows users to control or adjust various features and settings in accordance with his/her preferences. • Press the Menu/Set button on the remote control to see the main OSD menu. EXAMPLE of OSD Menu Picture Mode Standard Temperature Normal Video NR ON Film Mode OFF Screen Format 1 Wide Main Menu Press Menu/Set button on the remote control to enter the main OSD menu. First, select Main menu item you need with CH+/CH- key.
Setting the Channel Channel Type Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e., an antenna, a standard cable system, an HRC, or an IRC). 1 Press Menu/set button to display the main OSD menu. 2 Select the TV main menu item. Channel Type ¥ CATV Auto Scan Fine Tune 3 Press Menu/Set to enter the sub menu. 4 Select Channel Type and press VOL+ button to enter the ¥ parts.
Setting the Channel Fine Tune The Fine Tuning function lets you manually adjust the Monitor's tuner if you have difficulty tuning analog Channels. Press Menu/set button to display the main OSD menu. 1 Press Menu/set button to display the main OSD menu. 2 Select the TV main menu item. Auto Scan 3 Press Menu/Set to enter the Fine tune sub menu. Fine Tune 4 Select Fine tune with CH+/CH- button and press Menu/Set button. Then you can see the adjust bar.
Setting the Channel a Set the favorite channel You can store of your favorite channels for each available input source (such as TV or CATV). Then, when you press the FAVORITE button on the remote control, the Monitor display only the favorite channels you previously stored, allowing you to quickly and easily find frequently wanted channels. 1 Press Menu/set button to display the main OSD menu. 2 Select the TV main menu. Auto Scan 3 Press Menu/Set to enter the TV sub menu.
Setting the Picture Mode Your the Monitor has 3 automatic factory preset picture settings (“Standard”, “Vivid” and “Mild”). You can choose Standard, Vivid or Mild by pressing “Picture” button on the remote control (or by making a selection from the menu). Or you can select USER which automictically recalls your personalized picture setting. 1 Press Menu/set button to display the main OSD menu. 2 Select the picture main menu. 3 Press Menu/Set to enter the sub menu.
Setting the Picture Picture Mode is to set CH+ or adjust Picture Adjust, Mode, Video Noise Reduction, Screen Format and Burn Protection. Adjust USER Mode You can change the Contrast, Brightness, Color, and Sharpness according to personal preference in USER mode. 1 Select the item to adjust with CH-, CH+ button. 2 Press Menu/Set button. 3 Adjust the item with VOL-, VOL+ button. 4 To cancel all adjust, select Recall and press Menu/Set button.
Setting the Picture Contrast Adjust brightness difference between bright part of the screen and dark part. Distinct Vague Brightness Adjust brightness of the screen. Dark Bright Decrease Increase Green color is deeper Red color is deeper Less sharp Sharp Color Adjust deep and light color of the screen. Tint Adjusts the balance between green and yellow. Sharpness Adjust vividness of the screen.
Setting the Picture Temperature Mode Your the Monitor has 5 screen temperatures (color settings): Temperature Normal 1 Press Menu/set button to display the main OSD menu. Video NR ¥ ON 2 Select the picture main menu. Film Mode ¥ OFF 3 Press Menu/Set to enter the picture menu. 4 Select Temperature and press Menu/Set to enter the sub menu. Then the Picture-Temperature sub menu appear. Screen Format 5 Select the Temperature mode with CH-/CH+ button and press Menu/Set button.
Setting the Picture Video NR This function automatically filters out and reduces the image noise and improves picture quality where receiving weak signals. 1 Press Menu/Set button to display the main OSD menu. 2 Select the picture main menu item. Temperature 3 Press Menu/Set to enter the sub menu. Video NR ¥ OFF 4 Select Video NR and press VOL+ button to enter the ¥ parts. Then the cursor moves into the ¥ parts.
Setting the Picture Screen Format Description Wide Wide video: No change. 4:3 video: Expands 4:3 video signal horizontally to fit the Wide screen. Panorama Wide video: No change. 4:3 video: Expands 4:3 video horizontally to fit the Wide screen and to minimize distortion, sides are expanded more than center. Zoom 1 Expands Wide mode screen vertically. Zoom 2 Expands zoom 1 mode screen vertically. 4:3 Wide video: The image is suppressed. 4:3 video: No expansion. There are gray areas besides the image.
Setting the Picture ( PC ) In PC mode, you can adjust the H, V-Position, Native Mode and Phase. Also you can adjust them automatically. Geometry You can change H, V-Position, Native Mode and Phase in PC mode like usual PC monitors. You can also adjust them automatically. (Auto adjust function.) 1 Press Menu/set button to display the main OSD menu. 2 Select the picture main menu with CH+, CH- button. Temperature 3 Press Menu/Set to enter the sub menu.
Setting the Picture ( PC ) H-POSITION V-POSITION PHASE Mismatch 36 OWNER'S MANUAL Match
Setting the Sound In SOUND Menu, you can adjust balance, MTS ( Multi-Track Sound), AVC (Auto Volume Control) and select the equalizer settings. Balance This control allows you to adjust the balance of the left and right speaker output. 1 Press Menu/set button to display the main OSD menu. 2 Select the SOUND main menu. 3 Press Menu/Set to enter the sub menu. 4 Select Balance and press Menu/Set button. 5 Adjust the balance with VOL-, VOL+ button and press Menu/Set button.
Setting the Sound User Adjust You can use the OSD menu to change the Treble, Bass, Balance and DRC according to your preference. 1 Equalizer menu appear when you select USER mode. 2 Select a gain bar with VOL+, VOL- button on the remote control and adjust it with CH+/CH- button. 3 Press BACK or BACK button on the remote control to exit Equalizer. The result will be saved automatically. Select USER mode (Previous page) Equalizer 0.1 0.5 1.5 5.0 10.
Setting the Sound AVC(Auto Volume Control) This function adjust sound volume level automatically depending on the source. 1 Press Menu/set button to display the main OSD menu. 2 Select the SOUND main menu. 3 Press Menu/Set to enter the sub menu. 4 Select AVC and press VOL+ button to enter the ¥ parts. Then the cursor moves into the ¥ parts. 5 Turn on or off AVC function with CH+/CH- button and press BACK button.
Setting the Others Translucent Adjust the transparency of the OSD menu. There are 8 step from OFF to 7. 1 Press Menu/set button to display the main OSD menu. 2 Select the SET UP main menu with CH+/CHbutton on the remote control. 3 Press Menu/Set to enter the sub menu. 4 Select Translucent and press VOL+ button to enter the ¥ parts. Then the cursor moves into the ¥ parts. 5 Trucelant ¥ OFF PIP V-Chip Caption ¥ OFF Advanced Adjust with CH+/CH- button and press EXIT button.
Setting the Others SMALL LARGE TWIN Source in PIP Size Change the source of the PIP window. ¥ SMALL Source 1 2 Select Source and press Menu/Set to enter the sub menu. Then the PIP sub menu appear. Picture Swap Position The available sources will be displayed. Select the source and press Menu/Set button. TV AV 1 This picture is an example. The displayed sources may be different depending on the main input source.
Setting the Others Position in PIP Change the position of the PIP window. 1 2 Select Position with CH+/CH- button on the remote control and press Menu/Set to enter the sub menu. Then the PIP sub menu appear. In Sub Menu, there are four positions. Select the position with CH+/CH- button on the remote control and press BACK button. Size ¥ SMALL Source Picture Swap Position Right Down Right Up Left Up Left Down Advanced You can se up ID, Blue Back, Language and Front Key Lock in Advanced Menu.
Setting the Others Set ID in Advanced Set the ID of the Monitor for mass-controlling through the serial port. 1 Select Set ID and press VOL+ button to enter the ¥ part. Then the cursor moves into the ¥ part. 2 Adjust with CH+ / CH- button and press BACK button. Set ID ¥ 99 Blue Back ¥ OFF Language ¥ ENGLISH Front Key Lock ¥ OFF Blue Back in Advanced You can set to display blue-color screen instead of noise screen. 1 2 Select Blue Back and press VOL+ button to enter the ¥ parts.
Setting the Others V-Chip (TV Parental Guidelines Parental restrictions can be set up using either of two methods: The TV guidelines or the MPAA rating. 1 Press Menu/set button to display the main OSD menu. 2 Select the SET UP main menu with CH+/CHbutton on the remote control. 3 Press Menu/Set to enter the sub menu. 4 After enter the password, the V-Chip sub menu appear.
Setting the Others TV Blocking in V-Chip You can set up Restrictions Using the "TV Parental Guidelines" of FCC. 1 2 3 Select TV Blocking with CH+/CH- button on the remote control and press Menu/Set to enter the sub menu. Then the TV Blocking sub menu appear. You can independently lock the TV ratings. The locked TV (FCC) ratings are indicated by the symbol .
Setting the Others Change Password in V-Chip 1 2 Select Change Password with CH+/CH- button on the remote control and press Menu/Set to enter the sub menu. Then the Pass Word change sub menu appear. Enter the new password with numeric buttons on the remote control. TV Blocking Movie Blocking Change Password V-Chip Blocking ¥ OFF Pass Word ____ V-Chip Blocking in V-Chip 46 1 Select V-Chip Blocking with CH+/CH- buttons on the remote control. 2 Enter to the ¥ part by pressing VOL+ button.
Setting the Time In the TIME menu, you can set the current time and auto power on / off. Time Set Set the current time. 1 Press Menu/set button to display the main OSD menu. 2 Time Set AM 03:29 Select the TIME main menu. On Time AM 05:11 ON 3 Press Menu/Set to enter the sub menu. On Channel ¥ 99 ¥ 100 Select Time Set by pressing VOL+ button. On Volume 4 Off Time 5 Move the cursor by pressing VOL-, VOL+ button and adjust time by CH+, CH- button.
Setting the Time On Channel Set the channel when the Monitor power turn on automatically. • Available only when the Time is set and On Time is ON. 1 Press Menu/set button to display the main OSD menu. 2 Select the TIME main menu with CH+/CH- button on the remote control. Time Set AM 03:29 On Time AM 05:11 ON On Channel ¥ 99 ¥ 100 3 Press Menu/Set to enter the sub menu. On Volume 4 Select On Channel. Off Time 5 Enter to the ¥ part with VOL+ button.
Setting the Time Off Time This the Monitor can be set to turn off automatically at specific times that you choose. Before using the timer, you must set the Monitor's clock as described previously. 1 Press Menu/set button to display the main OSD menu. 2 Select the TIME main menu with CH+/CH- button on the remote control. 3 Press Menu/Set to enter the sub menu. 4 Select Off Time with CH+/CH- button on the remote control and press VOL+ button.
Troubleshooting If your monitor is not working properly, please scan this list of problems and possible solutions. It may save you time and money. Problem No picture & No sound Quick Action for Possible Solution • Check whether the Monitor is turned on. • Power cord inserted into wall outlet? • Plug another product's power cord into the wall outlet where the Monitor's power cord was plugged in. Picture OK & No sound • Press the VOLUME() button. • Check the audio input signal.
Warranty Card Limited Warranty Subject to the Limitations, Exclusions and Disclaimers hereof, InFocus Corporation ("InFocus") warrants that the LCD Thin Display Device and Accessories (hereinafter collectively or individually referred to as "Product" as appropriate) purchased from InFocus, an InFocus dis tributor, or an InFocus reseller will conform to InFocus' specifications and be free from defects in material or workmanship for the respective Limited Warranty period provided below.
Warranty Card Limited Warranty Period The Limited Warranty periods hereof commence on the date of purchase by the end-user customer. These Limited Warranty provisions shall apply only to the end-user purchaser (first person or entity that purchased a new Product for personal or business use and not for the purpose of distribution or resale).