User's Manual

• 20 • • 21 •
Setting Your Meter Before Testing – Coding the meter
LipidPro
TM
has two coding systems:
Lipid Profile test - each vial of test strip has RFID-tag which enables the meter to
recognize its code number automatically.
Glucose test - each test strip has color-tag on the back of the strip which enables
the meter to recognize its code number automatically.
Caution
The radiation of RFID recognition is within 2 cm.
The meter will be back to stand-by status if there is no operation within 5
seconds.
Press RFID(
▼ ) button for 3 or more seconds.
Place the RFID-tag on the strip bottle to the area
of the RFID symbol( ) on the meter.
• Coding for Lipid Profile test
By pressing ▲▼ , select tem-
perature unit and press MODE ( )
button.
By pressing ▲▼ , select average date and press
MODE ( ) button.
By pressing ▲▼ , select Alarm ON/OFF and press
MODE ( ) button. If you select Alarm ON, you can set
the time by pressing ▲▼ and press MODE ( )
button(you can set 2 alarms).
By pressing
▲▼ , select print ON/OFF and press
Mode( ). If you select ‘ON’ and press Mode( )button
to active it. If you select print, this setting mode is
completed.
By pressing Up( ▲ ) or Down( ▼ )
button, select testing unit and press
Mode( ) button.