User's Manual

• 22 • • 23 •
Before Testing – Coding the meter Before Testing – Coding the meter
• Coding for Glucose test
Caution
1. If the code is not displayed after 3 seconds, pull the test strip out of the port
and re-start the procedure from the beginning.
2. If the code on the display and on the test vial does not match, try another
new strip. If the mismatch persists, please contact your local representa-
tive for help.
3. If the meter does not power on, pull the test strip out of the port and re-
insert the test strip.
4. Avoid testing under direct sunlight, for a more accurate test result.
5. If you apply your sample too early, Error message will appear on the
display(refer to page 52 ).
1. Firmly insert the glucose test strip into the test
port of LipidPro
TM
meter, and then the power
will automatically turn on with the code number,
temperature and time.
2. Make sure the code number on the display of
the meter correspond with that on the test strip
bottle. The color tag of the back on the test strip
automatically recognizes the code number in
this system.
Once it recognizes the code number, the meter
displays the code value and test item(s) for 2
second and return to the stand-by status.
Check the code number on the display on the
meter with that on the strip bottle.
1504
C20