User's Manual

• 28 • • 29 •

Checking the system with control solution

2. Discard the 1st drop of control solution, this will

eliminate any residue.

3. Place a drop of control solution on a clean, dry

surface(ex. The lid of the test strip vial).

4. Insert a test strip into the port firmly and press Up(▲)

button. The symbol of control solution( ) will appear

on the display of meter. This will allow you to differenti-

ate between a control solution test and an actual

blood test for future reference.

5. Apply the test strip to the control solution.

6. Results appear in 3 seconds. Compare the result to the

range printed on the test strip vial, the results should

fall within that range.

INSTRUCTIONS FOR LANCING DEVICE

PRECAUTIONS

• Never use a lancet that has been used by someone else. This could lead to

contamination.

• If the lancing device is to be used by another person, the unit must be properly

disinfected and a new tip and lancet must be used.

• Do not leave the lancet in the device after use.

• A new lancet must only be placed into the lancing device directly before testing.

• This device has many small parts and could be a choking hazard for children if

swallowed.

• In the case of hospital use, hospitals need to consult their own infection control

protocols in order to avoid any contamination.

• Always dispose of the used lancet in a biohazard garbage container.

Depth Indicator/Adjustable Tip

Lancet Holder

Clear Tip

Ejection System Sliding Barrel

Release Button

COMPONENTS

ɋɍ