User's Manual

• 32 • • 33 •
Testing Your Blood - Preparation
1. Lipid Profile test
Capillary blood process
When you collect the sample, please use the capillary rod provided with
the test strip package. Make sure enough sample has been collected to
the capillary rod.
Place your fingertip to the top edge of
glucose test strip.
2. Glucose test
Caution
If blood is stained outside the sample area, carefully wipe the stain out with a
tissue. Do not allow the wiping tissue to touch the open end of the sample
area of the collecting leg.
completely
filled
poorly
filled
[ Correct ] [Incorrect ]
Correct : Completely filled Incorrect : Poorly filled
Testing Your Blood - Preparation
Caution
1)To reduce the chance of infection.
• The Lancing Device and sterile lancets should NOT be shared with
others.
• Always use a new, sterile lancet.
• Lancets are for single use only.
• Avoid getting hand lotion, oils, dirt, or debris in or on the Lancets and the
Lancing Device
2) Do not operate the meter in direct light.
3) Practice using the lancing device and become accustomed with its use.
Wash your hands with warm, clean water and soap. Dry your hands
completely before testing.
Blood testing
A strip instructions for use is included with each box of test strips.
Please read the strip instructions for use along with this section completely and
carefully before testing.
Testing supplies
To perform a blood test you need:
• LipidPro
TM
meter
• Test strips
• Sterile lancet
• Capillary rod
• Lancing device
[ Correct ] [Incorrect ]