User's Manual

• 34 • • 35 •
Quick reference of test procedure -Lipid test Quick reference of test procedure -Glucose test
1) After coding the meter, insert the test strip
and press Mode ( ) button
1) Insert the glucose test strip. Code number
is automatically displayed. Compare with
code number printed on test strip vial. If
not identical discard the test strip and
restart.
2) Prick the finger with a lancing device for
the sample blood.
3) Apply blood sample until confirmation
window is completely filled. Meter
automatically begins to countdown. If the
countdown does not start, do not add
more blood to the test strip! Discard the
test strip a restart testing.
4) Test results appear in 3 seconds.
2) Prick the finger with a lancing device for
the sample blood.
3) Collecting the sample blood to the
capillary rod.
Make sure the enough sample has been
collected to the capillary rod.
4) Contact the capillary rod with the sample
to the test area of the strip so as to start
the test.
Caution
• If the test result is out of the test range, the Hi/Lo message will be shown on the LCD.
• Safely discard used test strips, lancets and capillary rods.
• It is required to insert the blood sample on the Lipid Pro test strip within 3 minutes
while the blood inserting icon is blinking.
Caution
• If the test result is out of the test range, the Hi/Lo message will be shown on the LCD.
• Safely discard used test strips and lancets.