User's Manual

• 38 • • 39 •
Test Procedure Test Procedure
Press Mode ( ) button after a test strip is
inserted and confirm if the meter recognizes the
right test strip by checking out the corresponding
symbol on its display.
The meter displays the code number and the
testing symbols ( ) together. In 5 seconds
the meter automatically enters into testing mode.
The symbol of blood is blinking.
Please apply the sample to the test area of test
strip until you hear beep sound.
The meter displays , blinking in order,
which means it is under test.
When the test is completed (in about 2 minutes),
the meter displays the test result of with
the symbol.
Press Mode ( ) button after a test strip is
inserted and confirm if the meter recognizes the
right test strip by checking out the corresponding
symbol on its display.
The meter displays the code number and the
testing symbols ( ) together. In 5 seconds the
meter automatically enters into testing mode.
2. Test for each single item
1) Total Cholesterol test
2) HDL-Cholesterol test